JURA · SAN JOSE
Service · All Jura ModelsJura Commercial Coffee Machine Repair · San Jose, CA
Jura super-automatic coffee machine repair for San Jose offices and cafes, from Willow Glen to Almaden.
- $75 diagnostic (waived with repair)
- Same-day best effort
- CSLB #1136642
Jura in San Jose
Jura commercial service.
We work on Jura machines across San Jose, the cafes and restaurants along Lincoln Avenue in Willow Glen, the office parks near Almaden, and the shops through 95120, 95124, and 95125. A lot of these counters run a WE8 or an X8 as their only machine, and the tech corridor offices favor the GIGA X8 Professional for volume.
From San Ramon it is roughly a 40 to 50 minute drive down I-680. San Jose's water is hard enough that descaling drives most of the failures we see, so we push water filtration on plumbed Jura installs to cut the repeat calls.
Common repairs we do
What we close on the truck.
- GIGA and X-line brew-unit rebuilds. High-volume GIGA X8 and X10 machines in offices cycle the brew unit constantly. We rebuild it, replace worn gaskets, and reset brew pressure before pucks start sticking.
- Descaling and pump service. Scale from San Jose water chokes the pump and thermoblock. We descale the full circuit, test pump output, and recommend an inline filter so the boiler stays clean longer.
- Ceramic grinder and dosing. When shots run weak or the grinder grinds loud, the ceramic burrs are usually worn or packed. We service the grinder and recalibrate dose for steady output.
- Control board and flow meter faults. Error codes and stalled cycles on a WE8 or X8 often come back to the flow meter or control board. We test the board, check the meter, and replace what the diagnostic points to.
Models we service
Jura product lines.
- GIGA X3 and X8 Professional
- X8 and X10
- WE8
Pricing and warranty
What it costs. What we stand behind.
-
$75
Diagnostic visit. Waived when you book the repair with us.
-
1 yr
Parts and labor warranty on completed repairs. In writing before we start.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Nearby cities
Jura service in neighboring cities.
More cities
Jura across our service area.
- Jura in Alameda
- Jura in Alamo
- Jura in Atherton
- Jura in Berkeley
- Jura in Blackhawk
- Jura in Castro Valley
- Jura in Concord
- Jura in Danville
- Jura in Dublin
- Jura in Fremont
- Jura in Hayward
- Jura in Hillsborough
- Jura in Lafayette
- Jura in Livermore
- Jura in Los Altos
- Jura in Los Altos Hills
- Jura in Martinez
- Jura in Menlo Park
- Jura in Milpitas
- Jura in Moraga
- Jura in Mountain View
- Jura in Newark
- Jura in Oakland
- Jura in Orinda
- Jura in Palo Alto
- Jura in Piedmont
- Jura in Pleasant Hill
- Jura in Pleasanton
- Jura in Richmond
- Jura in San Leandro
- Jura in San Ramon
- Jura in Santa Clara
- Jura in Union City
- Jura in Walnut Creek
FAQ
Jura in San Jose questions, answered.
-
How quickly can you reach San Jose, including after hours?
San Jose is a 40 to 50 minute run from San Ramon. We schedule same-day where we can and take after-hours calls, since a down Jura on a cafe counter means lost sales every hour it sits. -
Do you stock parts or source them for San Jose jobs?
Brew-unit gaskets, seals, and descaling supplies ride with us. Ceramic burrs, flow meters, pumps, valves, and boards are sourced per model. We service Jura as an independent shop, not a factory-authorized center. -
What is a typical Jura repair cost?
The $75 diagnostic is waived once you approve the work, and you get a written quote first. Descaling and brew-unit maintenance are the usual recurring spend, with board or pump repairs running higher by line.
Need Jura service in San Jose?