JURA · HILLSBOROUGH
Service · All Jura ModelsJura Commercial Coffee Machine Repair · Hillsborough, CA
Jura bean-to-cup repair for Hillsborough offices and cafes, serviced by ADRIUM out of San Ramon.
- $75 diagnostic (waived with repair)
- Same-day best effort
- CSLB #1136642
Jura in Hillsborough
Jura commercial service.
Hillsborough sits in 94010 with very little of its own storefront retail, so most Jura machines we see here run in private estates, household offices, and the small commercial pockets that spill over from neighboring Burlingame Avenue. A GIGA X8 Professional in a home office or an X10 in a private kitchen still racks up the same brew cycles as a light cafe, and the hard Peninsula water scales them just as fast.
We run to Hillsborough from San Ramon in about 50 minutes across the bridge. If your Jura is plumbed to a water line, scale on the thermoblock and ceramic valves is the first thing we check, because that is what kills these machines on the Peninsula.
Common repairs we do
What we close on the truck.
- Brew unit wear and gasket replacement. The automatic brew unit is the part that wears first on a Jura. We pull it, replace worn gaskets and seals, and clean the piston so it stops leaking grounds into the drip tray.
- Descaling and thermoblock service. Hillsborough tap water is hard, so the thermoblock heater scales up and brew temperature drops. We descale the heater and water path and check the ceramic valves while we are in there.
- Ceramic grinder burr service. Jura uses a ceramic grinder. When the grind goes coarse or the motor strains, we inspect the burrs, clear bean oil buildup, and reset the grind so the machine pulls a proper shot again.
- Flow meter and pump faults. A Jura that under-fills or throws a water error usually has a clogged flow meter or a tired pump. We test both, clear scale from the flow path, and replace the pump if it has lost pressure.
Models we service
Jura product lines.
- GIGA X3 and X8 Professional
- X8 and X10
- WE8
Pricing and warranty
What it costs. What we stand behind.
-
$75
Diagnostic visit. Waived when you book the repair with us.
-
1 yr
Parts and labor warranty on completed repairs. In writing before we start.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Nearby cities
Jura service in neighboring cities.
More cities
Jura across our service area.
- Jura in Alameda
- Jura in Alamo
- Jura in Berkeley
- Jura in Blackhawk
- Jura in Castro Valley
- Jura in Concord
- Jura in Cupertino
- Jura in Danville
- Jura in Dublin
- Jura in Fremont
- Jura in Hayward
- Jura in Lafayette
- Jura in Livermore
- Jura in Los Altos
- Jura in Los Gatos
- Jura in Martinez
- Jura in Menlo Park
- Jura in Milpitas
- Jura in Moraga
- Jura in Mountain View
- Jura in Newark
- Jura in Oakland
- Jura in Orinda
- Jura in Piedmont
- Jura in Pleasant Hill
- Jura in Pleasanton
- Jura in Richmond
- Jura in San Jose
- Jura in San Leandro
- Jura in San Ramon
- Jura in Santa Clara
- Jura in Saratoga
- Jura in Sunnyvale
- Jura in Union City
- Jura in Walnut Creek
FAQ
Jura in Hillsborough questions, answered.
-
How fast can you get to Hillsborough, and do you handle after-hours?
We are about 50 minutes out from San Ramon and usually book Hillsborough within a day or two. A dead Jura in a working office or cafe costs you cups, so we keep after-hours and weekend slots open for machines that are fully down. -
Do you stock Jura parts or have to order them?
We carry common Jura wear parts on the van, brew-unit gaskets, seals, and descaling supplies. Pumps, ceramic valves, flow meters, and control boards we source per machine since they vary by line like the X10, WE8, or GIGA X8. -
What does a repair cost?
Diagnostic is $75 and it is waived when you approve the repair. You get a written quote before any work starts, so there are no surprises after we open the machine up.
Need Jura service in Hillsborough?