Stocked parts or ordered?

Solenoids, gaskets, and filtration media we carry. Needle valve internals, boards, and other boutique Slayer parts we source through Slayer and order in.

SLAYER · DUBLIN

Service · All Slayer Models

Slayer Commercial Coffee Machine Repair · Dublin, CA

Slayer espresso machine repair for Dublin coffee shops and grocery-anchor cafes.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Slayer in Dublin

Slayer commercial service.

Dublin's cafes cluster around the Hacienda Crossings and Dublin Place centers and the newer Dublin Boulevard retail near the BART corridor in 94568. The Slayer machines we see here run in high-traffic suburban shops and grocery-anchored coffee bars, where the volume is steady and the water line never gets a rest. Steady volume on city water means scale, and scale means flow problems.

From San Ramon it is a quick 15 to 20 minutes up 680.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Descaling and water quality. Steady-volume Dublin shops scale the brew boiler quickly. We descale the machine and recommend filtration sized to the water so the buildup stops.
Brew and steam solenoids. When a group stops dosing or the steam valve sticks, the solenoid is the cause. We test and replace the brew or steam solenoid and check the timing.
Needle valve and actuator. The Slayer flow profile lives in the needle valve. If pre-infusion goes weak, we clean or rebuild the valve and actuator to bring the ramp back.
Boiler element and probe. A machine that won't hold temp usually has a failing boiler element or probe. We test both and replace the bad part so brew temperature holds.

Models we service

Slayer product lines.

Slayer Espresso (1, 2, 3 group)
Single Group
Steam EP/LP/X

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Nearby cities

Slayer service in neighboring cities.

More cities

Slayer across our service area.

FAQ

Slayer in Dublin questions, answered.

Stocked parts or ordered?

Solenoids, gaskets, and filtration media we carry. Needle valve internals, boards, and other boutique Slayer parts we source through Slayer and order in.
What does the Slayer pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Slayer bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Slayer coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Slayer service in Dublin?

Tell us what the machine is doing. We will confirm pickup.