Do you stock Slayer parts?

Common seals, gaskets, and solenoids are on the truck. Needle valve internals, boards, and boiler elements get sourced through Slayer and add a few days.

SLAYER · CASTRO VALLEY

Service · All Slayer Models

Slayer Commercial Coffee Machine Repair · Castro Valley, CA

Slayer espresso machine repair for Castro Valley, along the Castro Valley Boulevard corridor.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Slayer in Castro Valley

Slayer commercial service.

Castro Valley's coffee runs along Castro Valley Boulevard and the shops near the BART station in 94546, with more cafes spread out toward the Five Canyons and Palomares side in 94552. The independent bars here run Slayer Espresso machines and depend on the flow profiling, so they call when the needle valve or a solenoid acts up.

Castro Valley is about 20 minutes from San Ramon down 580.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Needle valve and actuator. When the flow profile flattens, the brew needle valve is the place to start. We rebuild the valve and actuator and reset the profiling on the affected group.
Brew and steam solenoids. Scale sticks the solenoids, leaving you a dribbling group or a wand that won't cut off. We clean or replace the solenoid and clear the line.
Pump replacement. Noisy or weak extraction across all groups usually means the pump. We test pressure and replace the pump, then confirm the flow holds steady.
Descaling and water quality. Castro Valley's plumbed water scales these machines. We descale the boiler and lines and recommend filtration so valves and the element stop failing early.

Models we service

Slayer product lines.

Slayer Espresso (1, 2, 3 group)
Single Group
Steam EP/LP/X

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Nearby cities

Slayer service in neighboring cities.

More cities

Slayer across our service area.

FAQ

Slayer in Castro Valley questions, answered.

Do you stock Slayer parts?

Common seals, gaskets, and solenoids are on the truck. Needle valve internals, boards, and boiler elements get sourced through Slayer and add a few days.
What does the Slayer pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Slayer bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Slayer coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Slayer service in Castro Valley?

Tell us what the machine is doing. We will confirm pickup.