Can you get to San Bruno quickly if a machine goes down before breakfast service?

Our technician is based on the Peninsula, in San Mateo County, and San Bruno sits inside his usual run. For a hotel that needs coffee working before guests come down, we can often take the first slot of the morning.

How much do you charge just to look at a machine?

$99 for the diagnostic. Approve the repair and that fee is credited toward the repair, with a written quote covering parts and labor first.

How long does it take to get parts once you know what's wrong?

We usually stock the common repair parts, and we confirm timing after the on-site diagnosis. Boards and pumps get ordered in, and I give you a lead time with the written quote.

EVERSYS · SAN BRUNO

Service · All Eversys Models

Eversys Commercial Coffee Machine Repair · San Bruno, CA

Eversys super-automatic espresso repair in San Bruno, from the counters near Tanforan to the offices off Skyline.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Eversys in San Bruno

Eversys commercial service.

San Bruno runs a mix of retail coffee counters at The Shops at Tanforan, corporate break rooms near the office campuses off Skyline Boulevard, and hotel lobbies close enough to SFO that guests expect real espresso at five in the morning. Eversys machines show up in all three settings because they hold cup quality without needing a barista on every shift.

I'm not a factory-authorized Eversys tech. I'm an independent operator who has spent years inside the e-series and Cameo lineup, and that's what I bring to a San Bruno call: knowing the brew group and grinder assemblies well enough to fix them right the first time.

A $99 diagnostic gets you a clear answer, and it's credited toward the repair. Quotes are written, not verbal, and we take calls seven days a week.

Common repairs we do

What we close on the truck.

Touchscreen and control board faults. A retail counter machine at Tanforan gets its touchscreen tapped hundreds of times a day, and the panel eventually starts missing touches or freezing mid-order. I test the display against the board, reseat the ribbon connection, and replace the panel or board depending on where the fault actually lives.
Boiler descale on municipal hard water. San Bruno's water leaves scale on the boiler and internal valves faster than most owners expect, and that shows up as slow heat-up times or a temperature that won't hold steady. I descale the boiler, check the valves for damage, and set up filtration sized to the machine's daily volume.
Brew group piston wear from early hotel breakfast volume. A hotel breakfast rush near SFO puts a hard, short burst of shots through the brew group every morning, and that pattern wears the piston seals unevenly. I rebuild the group and check the timing so the machine keeps up with a compressed service window instead of leaking or losing pressure mid-rush.

Models we service

Eversys product lines.

e-series (e2, e4, e6)
c-series (c2, c4)
Shotmaster
Cameo and Legacy

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Eversys jobs we have closed.

Martinez, CA · Eversys super-automatic espresso machine

Eversys Shotmaster Bean Hopper Fault Fixed in Martinez

The Shotmaster kept reading the left bean hopper as empty or locked even with beans in it, which locked staff out of pulling any drinks.
Read case →

See all case studies →

Nearby cities

Eversys service in neighboring cities.

More cities

Eversys across our service area.

FAQ

Eversys in San Bruno questions, answered.

Can you get to San Bruno quickly if a machine goes down before breakfast service?

Our technician is based on the Peninsula, in San Mateo County, and San Bruno sits inside his usual run. For a hotel that needs coffee working before guests come down, we can often take the first slot of the morning.
How much do you charge just to look at a machine?

$99 for the diagnostic. Approve the repair and that fee is credited toward the repair, with a written quote covering parts and labor first.
How long does it take to get parts once you know what's wrong?

We usually stock the common repair parts, and we confirm timing after the on-site diagnosis. Boards and pumps get ordered in, and I give you a lead time with the written quote.

Need Eversys service in San Bruno?

Tell us what is broken. We will quote it.