The shots taste sour on hot afternoons. Could the machine be the cause?

It can be. A drifting temperature sensor or a weak element lets brew temperature fall below target, and sour shots follow. Room heat adds load on top of that. On the bench we measure brew temperature directly and find which part is off.

Do you pick up in Clayton, out by Mount Diablo?

Yes. Clayton is inside our pickup area, including Dana Hills, Clayton Wood and Peacock Creek. We collect the machine, diagnose it on our bench, and return it when the approved work is finished.

Does Contra Costa Water District water call for a filter on the machine?

An inlet filter helps on any plumbed Eversys. How strong a filter and how often to change it depends on what your water leaves behind, so we look at the scale inside the boilers and valves on the bench and size the recommendation to that and to your drink count.

EVERSYS · CLAYTON

Service · All Eversys Models

Eversys Commercial Coffee Machine Repair · Clayton, CA

Eversys temperature and boiler repair for Clayton, at the foot of Mount Diablo, with pickup, bench diagnosis and return.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Eversys in Clayton

Eversys commercial service.

Clayton summers are hot and dry, and a super-automatic working in a warm room has less margin for heat. An Eversys holds brew and steam temperature with sensors and, on some models, two boilers. When a sensor drifts or an element weakens, the shots taste flat or sour well before any error appears on the screen.

Clayton is on Contra Costa Water District water, drawn from the Delta. We check what that water has left inside the boilers and sensors when the machine is open on our bench. Pickup covers Dana Hills, Peacock Creek, Clayton Wood, Cardinet Glen and the rest of town. The machine goes to the bench, the quote comes in writing, and the approved repair comes back tested.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Brew temperature drifting off target. A temperature sensor that has drifted lets the machine brew a few degrees off without complaint. We check its reading against a probe in the brew path, replace the sensor if it is off, and pull shots until the temperature holds.
Heating element losing output. An element that has weakened or picked up scale takes longer to recover between drinks, and the steam side sags during a rush. We measure its resistance, check the thermal cutout, and replace the element if either fails the test.
Airflow around a machine in a warm room. The pumps and electronics packed inside an Eversys need to shed heat. If your machine sits in a closed alcove or next to a hot appliance, we say so on the ticket, because giving it room to breathe can save a board later.

Models we service

Eversys product lines.

e-series (e2, e4, e6)
c-series (c2, c4)
Shotmaster
Cameo and Legacy

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Recent work

Eversys jobs we have closed.

Martinez, CA · Eversys super-automatic espresso machine

Eversys Shotmaster Bean Hopper Fault Fixed in Martinez

The Shotmaster kept reading the left bean hopper as empty or locked even with beans in it, which locked staff out of pulling any drinks.
Read case →

See all case studies →

Nearby cities

Eversys service in neighboring cities.

More cities

Eversys across our service area.

FAQ

Eversys in Clayton questions, answered.

The shots taste sour on hot afternoons. Could the machine be the cause?

It can be. A drifting temperature sensor or a weak element lets brew temperature fall below target, and sour shots follow. Room heat adds load on top of that. On the bench we measure brew temperature directly and find which part is off.
Do you pick up in Clayton, out by Mount Diablo?

Yes. Clayton is inside our pickup area, including Dana Hills, Clayton Wood and Peacock Creek. We collect the machine, diagnose it on our bench, and return it when the approved work is finished.
Does Contra Costa Water District water call for a filter on the machine?

An inlet filter helps on any plumbed Eversys. How strong a filter and how often to change it depends on what your water leaves behind, so we look at the scale inside the boilers and valves on the bench and size the recommendation to that and to your drink count.
What does the Eversys pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Eversys bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Eversys coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Eversys service in Clayton?

Tell us what the machine is doing. We will confirm pickup.