Do you pick up in Crockett and Port Costa as well as Rodeo?

Yes. We collect from Rodeo, Crockett and Port Costa, take the machine to our bench, and return it to the same counter once you approve the quote and the work is finished.

Does Port Costa water change how we should look after the machine?

Port Costa is on Contra Costa Water District water rather than EBMUD, so the scale it leaves can differ from what turns up in Rodeo. We look inside the machine on the bench and set a descaling interval to what we actually find.

What happens after you pick the machine up?

It goes on our bench with water and power connected. We run it until the fault shows, find the failed part, and write the quote. Nothing is replaced until you approve it. Then we repair it, test it with a run of drinks, and bring it back.

EVERSYS · RODEO

Service · All Eversys Models

Eversys Commercial Coffee Machine Repair · Rodeo, CA

Eversys repair for Rodeo, Crockett and Port Costa: pickup, bench diagnosis and a written quote before approved work.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Eversys in Rodeo

Eversys commercial service.

Rodeo sits on the eastern shore of San Pablo Bay, with Crockett and Port Costa close by, and we pick up in all three. The water differs a little: EBMUD serves Rodeo and Crockett, while Port Costa gets treated water from the Contra Costa Water District. For an Eversys that matters mostly for descaling and filter intervals, which we set after looking inside the machine.

When an Eversys has been in service for years, one question comes before the others: repair it or replace it? These are dense machines, with hydraulics, sensors, boilers and boards packed tight, but most failures sit in parts that can be replaced. We diagnose on our bench, price each part the machine needs, and give you a written quote you can weigh against a new machine. Licensed California contractor, CSLB #1136642.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Deciding between repair and replacement. We look at the frame, the brew unit, the boilers and the electronics, then separate what is worn from what is failing. If the needed parts add up to more than the machine is worth to you, the quote says so plainly.
Pump pressure dropping after years of use. A tired pump no longer holds pressure through the brew cycle, and extraction suffers. We test the pump under load, replace it or its seals when it falls short, and confirm the pressure across a run of shots.
Brew and hydraulic valve rebuilds. Years of cycling wear the valve seats, even on softer water. We rebuild the brew and hydraulic valves with new seals, which often brings back a machine that had started to drip and lose pressure.

Models we service

Eversys product lines.

e-series (e2, e4, e6)
c-series (c2, c4)
Shotmaster
Cameo and Legacy

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Recent work

Eversys jobs we have closed.

Martinez, CA · Eversys super-automatic espresso machine

Eversys Shotmaster Bean Hopper Fault Fixed in Martinez

The Shotmaster kept reading the left bean hopper as empty or locked even with beans in it, which locked staff out of pulling any drinks.
Read case →

See all case studies →

Nearby cities

Eversys service in neighboring cities.

More cities

Eversys across our service area.

FAQ

Eversys in Rodeo questions, answered.

Do you pick up in Crockett and Port Costa as well as Rodeo?

Yes. We collect from Rodeo, Crockett and Port Costa, take the machine to our bench, and return it to the same counter once you approve the quote and the work is finished.
Does Port Costa water change how we should look after the machine?

Port Costa is on Contra Costa Water District water rather than EBMUD, so the scale it leaves can differ from what turns up in Rodeo. We look inside the machine on the bench and set a descaling interval to what we actually find.
What happens after you pick the machine up?

It goes on our bench with water and power connected. We run it until the fault shows, find the failed part, and write the quote. Nothing is replaced until you approve it. Then we repair it, test it with a run of drinks, and bring it back.
What does the Eversys pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Eversys bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Eversys coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Eversys service in Rodeo?

Tell us what the machine is doing. We will confirm pickup.