Do you carry parts or order them in?

Common gaskets, solenoid kits, and flow meters are on the van. Boards and specific boiler elements we source from suppliers, typically a day or two out.

SYNESSO · BLACKHAWK

Service · All Synesso Models

Synesso Commercial Coffee Machine Repair · Blackhawk, CA

Synesso commercial espresso machine repair for Blackhawk and the Tassajara corridor.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Synesso in Blackhawk

Synesso commercial service.

Blackhawk runs to gated estates and the shops at Blackhawk Plaza in 94506, where the cafes and the bigger private kitchens both keep Synesso machines. It's an upscale, low-density area, so we see a mix of light-traffic counters and home setups, all on plumbed lines.

From San Ramon it's a quick run, about 15 to 20 minutes over Camino Tassajara. Machines that sit idle between bursts still scale on the water line, so we check filtration and descale on most visits. A Synesso that idles a lot needs its seals and boiler watched as closely as a busy one.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Descaling for low-volume machines. A machine that sits between uses still builds scale on a plumbed line. We descale the boiler and recommend filtration so the S-series stays clean through the groups.
Per-group solenoid and gasket rebuild. Idle gaskets dry and weep, and solenoids stick. We rebuild the valve and fit fresh group seals so each head pours clean after sitting.
Boiler element and PID per group. When one group's temperature drifts, the element or PID is the cause. We descale, test, and replace as needed so per-group temperature holds steady.
Control board diagnosis. Blank displays or a group that won't fire often come back to the board or a connector. We test before replacing so you're not buying a board you didn't need.

Models we service

Synesso product lines.

MVP Hydra
S-series (S200/S300)
ES1

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Nearby cities

Synesso service in neighboring cities.

More cities

Synesso across our service area.

FAQ

Synesso in Blackhawk questions, answered.

Do you carry parts or order them in?

Common gaskets, solenoid kits, and flow meters are on the van. Boards and specific boiler elements we source from suppliers, typically a day or two out.
What does the Synesso pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Synesso bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Synesso coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Synesso service in Blackhawk?

Tell us what the machine is doing. We will confirm pickup.