Skip to main content
ADRIUM Service Solutions
(925) 999-4095 · San Ramon, CA · CSLB #1136642 · BBB A+

SYNESSO · ALBANY

Service · All Synesso Models

Synesso Commercial Coffee Machine Repair · Albany, CA

Synesso espresso machine repair for Albany's cafes along Solano Avenue.

  • $75 diagnostic (waived with repair)
  • Same or next-day best effort
  • CSLB #1136642
Call (925) 999-4095

Synesso in Albany

Synesso commercial service.

Albany is only 1.8 square miles, but Solano Avenue keeps a tight run of cafes, bakeries, and small restaurants going that spills over from North Berkeley, and enough of those counters run Synesso groups to keep us busy on this stretch alone. San Pablo Avenue cuts across Solano with a second row of storefronts, so an Albany stop usually means checking both strips.

The drive from San Ramon runs about 40 to 45 minutes on I-580 or the 24 to I-80, and Albany goes on the same route as our Berkeley and Richmond days. The water supply here is hard like the rest of this stretch of the East Bay, and a small counter on Solano can still push as many covers through a shift as a shop twice its footprint, so the groups scale up just as fast. Filtration is the first thing we look at on any visit.

Common repairs we do

What we close on the truck.

  • High-volume solenoid and gasket service. A Solano Avenue counter squeezed into a small space still fires its groups nonstop through breakfast and lunch. We rebuild worn solenoids and replace gaskets so an MVP Hydra or S300 stays tight even on a day with no real gap between orders.
  • Boiler element and PID per group. A boiler under constant daily use scales up quick, and the PID drifts off target as a result. We descale, swap the element if it's pitted, and check that each group holds its temperature all the way through a busy stretch.
  • Flow meter cleaning and replacement. When shots start drifting over the course of a shift, we look at the flow meter first. We clean it, replace it if it's lost calibration, and confirm the dose matches across every group.
  • Pump and motor service. Pressure dropping off mid-shift points to the pump or motor. We test line pressure, rebuild or swap the pump, and check the machine holds steady pressure once it's running again.

Models we service

Synesso product lines.

  • MVP Hydra
  • S-series (S200/S300)
  • ES1

Pricing and warranty

What it costs. What we stand behind.

  • $75

    Diagnostic visit. Waived when you book the repair with us.

  • Written

    90 days on consumables, 1 year on major parts, 2 years on sealed-system rebuilds. Quoted in writing before work starts.

  • CSLB

    #1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Synesso service in neighboring cities.

FAQ

Synesso in Albany questions, answered.

  • How fast can you get to an Albany shop?
    About 40 to 45 minutes from San Ramon, and Albany rides along with our Berkeley and Richmond Inner East Bay route. A booked window gets a written arrival time before we head out. We take after-hours calls too, since a dead machine costs a small shop real money fast.
  • Do you stock parts or order them?
    The parts we replace most, group gaskets, solenoid kits, flow meters, stay on the truck. Boards and specific boiler elements come from a supplier, usually within a day or two.
  • What does a typical repair cost?
    Diagnostic is $75, waived if you approve the repair on the spot. You'll have a written quote in hand before anything gets taken apart.

Need Synesso service in Albany?

Tell us what is broken. We will quote it.

Call (925) 999-4095
Call Now

Schedule a visit

Tell us what you need

  1. 1
  2. 2
  3. 3
  4. 4
What kind of appliance?
Which brand?
What's wrong, or what do you need?
Where can we reach you?

Request received.

Andrew will call you back during business hours to confirm the visit.