How fast can you be in Walnut Creek, even after hours?

About 20 minutes from San Ramon, so same-day is the norm and often within a couple hours. A dead machine costs a cafe sales, so we take after-hours calls when we can and give you a straight ETA.

Do you stock the parts or order them in?

Common Miele wear parts, brew-unit gaskets, valves, and grinder burrs, are on the van. Control boards and uncommon parts we source, and the quote spells out which before we order.

What does a typical repair run?

Diagnostic is $75 and waived when you approve the repair, with a written quote on parts and labor before any work. We are an independent shop, not Miele-authorized. CSLB #1136642.

MIELE PROFESSIONAL · WALNUT CREEK

Service · All Miele Professional Models

Miele Professional Commercial Coffee Machine Repair · Walnut Creek, CA

Miele Professional coffee machine repair for Walnut Creek offices and downtown cafes.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

Miele Professional in Walnut Creek

Miele Professional commercial service.

Walnut Creek has the executive break rooms and the cafe foot traffic to match. The offices around Ygnacio Valley Road and the shops in the Broadway Plaza and downtown blocks (94596) run Miele CM and CVA built-in units, and a few light cafes off North Main lean on them too. We also cover 94595 and 94597.

From San Ramon it is a short hop, about 20 minutes up 680, so this is close to home base for us. We stock the common Miele service parts, which means most break-room and cafe calls wrap on the first visit.

Common repairs we do

What we close on the truck.

Brew unit and seals. The brew unit on CM 5/6/7 machines wears its gaskets and starts to leak or bind. We service the unit, replace the seals, and check the drive mechanism.
CVA built-in service. The CVA built-in units sit flush in executive break rooms and need the same brew and water-path care. We pull and service them without tearing up the cabinetry.
Descaling and thermoblock. Scale builds in the thermoblock and slows heat-up. We descale the water path and set up filtration so the buildup does not return on a plumbed line.
Control electronics and valves. Sticking valves and flaky control boards cause error codes and dead buttons. We diagnose the electronics, clear or replace failed valves, and get the machine reading right.

Models we service

Miele Professional product lines.

CM 5, 6, 7 series
CVA built-in
professional units

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Miele Professional service in neighboring cities.

More cities

Miele Professional across our service area.

FAQ

Miele Professional in Walnut Creek questions, answered.

How fast can you be in Walnut Creek, even after hours?

About 20 minutes from San Ramon, so same-day is the norm and often within a couple hours. A dead machine costs a cafe sales, so we take after-hours calls when we can and give you a straight ETA.
Do you stock the parts or order them in?

Common Miele wear parts, brew-unit gaskets, valves, and grinder burrs, are on the van. Control boards and uncommon parts we source, and the quote spells out which before we order.
What does a typical repair run?

Diagnostic is $75 and waived when you approve the repair, with a written quote on parts and labor before any work. We are an independent shop, not Miele-authorized. CSLB #1136642.

Need Miele Professional service in Walnut Creek?

Tell us what is broken. We will quote it.

Call (925) 999-4095