How quickly can you reach Orinda, even after hours?

Orinda is 15 to 20 minutes from our San Ramon base over the 24, so we are often same-day. We take after-hours calls because an office or cafe with a dead machine is losing service every hour it sits.

Will you have the part or do you need to order it?

Brew-unit gaskets, seals, milk valves, and burrs are on the van. Boards and uncommon assemblies for CVA built-ins or older CM units we order from supply, usually a day or two, and we say so up front.

The $75 diagnostic is waived when you go ahead with the repair, and you get a written quote first. Given the drive is short, Orinda calls stay simple. We will tell you straight if a unit is not worth the fix.

MIELE PROFESSIONAL · ORINDA

Service · All Miele Professional Models

Miele Professional Commercial Coffee Machine Repair · Orinda, CA

Miele Professional coffee machine repair in Orinda, for the village offices and home-style break rooms off Moraga Way.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

Miele Professional in Orinda

Miele Professional commercial service.

Orinda is small and quiet, and most of the Miele machines here are CM-series and CVA built-ins in professional offices around the Orinda Village center and the Theatre district off Moraga Way in 94563. A few light cafes near the BART plaza run them too. This is low-to-medium duty, the spot where a Miele holds up well.

We come from San Ramon, a straight 15 to 20 minutes over the 24. That short drive means we can usually get a tech to a stalled machine in 94563 the same day, with brew-unit and grinder parts already on the van.

Common repairs we do

What we close on the truck.

Descaling and water filtration. Orinda runs hard water, and scale is the number-one killer of these plumbed machines. We descale, flush the thermoblock, and set up or replace the inline filter so it does not come back fast.
Brew unit service. On a CM 6 or 7 the brew group wears at the seals and gets gummy. We pull it, clean the path, and replace gaskets so pressure builds right and grounds stop ending up in the tray.
Conical grinder burrs. Light-duty grinders still dull and jam on oily beans. We clear the chute, replace worn burrs, and reset grind so dosing is consistent again.
Control electronics. When a CVA built-in or CM unit throws a fault or the panel goes dark, we trace the board, sensors, and wiring. Some boards we source, and we quote that before ordering.

Models we service

Miele Professional product lines.

CM 5, 6, 7 series
CVA built-in
professional units

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Miele Professional service in neighboring cities.

More cities

Miele Professional across our service area.

FAQ

Miele Professional in Orinda questions, answered.

How quickly can you reach Orinda, even after hours?

Orinda is 15 to 20 minutes from our San Ramon base over the 24, so we are often same-day. We take after-hours calls because an office or cafe with a dead machine is losing service every hour it sits.
Will you have the part or do you need to order it?

Brew-unit gaskets, seals, milk valves, and burrs are on the van. Boards and uncommon assemblies for CVA built-ins or older CM units we order from supply, usually a day or two, and we say so up front.
What will it cost?

The $75 diagnostic is waived when you go ahead with the repair, and you get a written quote first. Given the drive is short, Orinda calls stay simple. We will tell you straight if a unit is not worth the fix.

Need Miele Professional service in Orinda?

Tell us what is broken. We will quote it.

Call (925) 999-4095