Skip to main content
ADRIUM Service Solutions
(925) 999-4095 · San Ramon, CA · CSLB #1136642 · BBB A+
Call

DCS · SAN CARLOS

Service · All DCS Models

DCS Cooking Appliance Repair · San Carlos, CA

DCS cooking appliance repair for San Carlos, from the Laurel Street corridor up into the Eaton and White Oaks hills.

  • $99 diagnostic (credited toward the repair)
  • Same or next-day best effort
  • CSLB #1136642
Call (925) 999-4095

DCS in San Carlos

DCS in San Carlos kitchens.

San Carlos kitchens near the Laurel Street corridor and up into the Eaton and White Oaks neighborhoods run a good number of DCS ranges, and the RGS series shows up most in homes that did a full kitchen remodel in the last ten to fifteen years.

The failure pattern here is what shows up on most DCS units at that age: top-burner ignition trouble, an oven glow-bar igniter that glows but won't open the gas valve, and burners that won't hold a low simmer.

ZIP 94070. We cover Belmont and Redwood City on the same route, and the Peninsula-based technician means San Carlos gets regular coverage rather than a one-off trip.

Common repairs we do

What we close on the truck.

  • Top-burner ignition fault. No spark, or a steady click with no ignition. I check the electrode gap first, then the reignition module and the burner switch behind the control panel.
  • Oven bake glow-bar igniter. The glow-bar heats up but doesn't pull enough current to trip the safety valve open, so the oven never lights. Straightforward igniter swap, though I check the dual thermal valve on the older RGS ovens while the panel is off.
  • Burner won't simmer or burns yellow. Jets clogged with cooking residue, or a burner cap that isn't seated flush on its locating pins. Both show up as a rough, yellow-tipped flame instead of a clean blue one.

Models we service

DCS product lines.

  • RGS professional gas ranges (30, 36, 48, 60 inch)
  • Sealed dual-orifice burners
  • Integrated grill and griddle modules
  • Infrared broiler and gas convection oven
  • Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

  • $99

    Diagnostic visit. Credited toward the repair.

  • Written

    3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.

  • CSLB

    #1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in San Carlos questions, answered.

  • Do you cover San Carlos regularly or just when someone calls?
    Regularly. We have a technician based on the Peninsula in San Mateo County, so San Carlos sits inside normal coverage along with Belmont and Redwood City. I won't promise same-day for every call, but the response here isn't a special trip from the East Bay.
  • Is DCS still made by Fisher and Paykel?
    Yes, DCS is part of the Fisher and Paykel family. That matters for parts. I stock the igniters and switches that fail most, and anything specific to your model I order through their pipeline once I confirm the part number in person.
  • How much is a DCS service call in San Carlos?
    The diagnostic is $99 and gets credited toward the repair. I give a written quote for the actual repair after I've seen what's wrong, since it depends on which part failed. Gas work is licensed under CSLB #1136642.

Need DCS service in San Carlos?

Tell us what is broken. We will quote it.

Call (925) 999-4095
Call Now

Schedule a visit

Tell us what you need

  1. 1
  2. 2
  3. 3
  4. 4
What kind of appliance?
Which brand?
What's wrong, or what do you need?
Where can we reach you?

Request received.

Andrew will call you back during business hours to confirm the visit.