How quickly can you reach Menlo Park for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 84. Same-day work is realistic when we have a window. Sand Hill and Allied Arts calls routed together.

Do you carry common DCS parts for the typical units in Menlo Park?

We carry spark electrodes, reignition modules, transformers, burner switches, and glow-bar igniters on the truck. Thermal valves, dual thermal valves, and convection motors we source per call through the Fisher and Paykel pipeline.

What is the typical cost for a DCS ignition or oven igniter call in Menlo Park?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $440. Oven glow-bar igniter runs $300 to $520. Gas work is licensed CSLB #1136642. Written quote before we start.

DCS · MENLO PARK

Service · All DCS Models

DCS Cooking Appliance Repair · Menlo Park, CA

DCS by Fisher and Paykel RGS pro all-gas range, grill, and griddle service for Menlo Park.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

DCS in Menlo Park

DCS in Menlo Park kitchens.

Menlo Park DCS calls cluster in the Sand Hill and Allied Arts estate kitchens. A lot of these homes run a DCS RGS pro all-gas range with the GL grill or GD griddle module, and several pair it with a built-in DCS outdoor grill off the patio.

We see top-burner ignition faults and oven glow-bar igniter failures most often on these installs past year ten. ZIP 94025 and 94027. Drive time from San Ramon is 35 minutes via 680 and 84.

Common repairs we do

What we close on the truck.

Top-burner ignition fault. Click without spark or no reignition. Traced to the spark electrode, reignition module, transformer, or burner switch.
Burner will not simmer or burns yellow. Restricted jets, a misaligned burner with locating pins not seated, or the wrong orifices after an LP conversion.
Grill or griddle burner. Weak igniter or a stuck thermal valve on the GL or GD module. Igniter and valve test, swap as needed.
Oven bake glow-bar igniter. Igniter glows but draws too little current to open the safety valve. Glow-bar swap, or dual thermal valve and convection motor when indicated.

Models we service

DCS product lines.

RGS professional gas ranges (30, 36, 48, 60 inch)
Sealed dual-orifice burners
Integrated grill and griddle modules
Infrared broiler and gas convection oven
Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in Menlo Park questions, answered.

How quickly can you reach Menlo Park for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 84. Same-day work is realistic when we have a window. Sand Hill and Allied Arts calls routed together.
Do you carry common DCS parts for the typical units in Menlo Park?

We carry spark electrodes, reignition modules, transformers, burner switches, and glow-bar igniters on the truck. Thermal valves, dual thermal valves, and convection motors we source per call through the Fisher and Paykel pipeline.
What is the typical cost for a DCS ignition or oven igniter call in Menlo Park?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $440. Oven glow-bar igniter runs $300 to $520. Gas work is licensed CSLB #1136642. Written quote before we start.

Need DCS service in Menlo Park?

Tell us what is broken. We will quote it.