How quickly can you reach Palo Alto for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 84. Same-day work is realistic when we have a window. Old Palo Alto and the 94301, 94303, 94306 ZIPs routed together.

Do you carry common DCS parts for the typical units in Palo Alto?

We carry spark electrodes, reignition modules, transformers, burner switches, and glow-bar igniters on the truck. Thermal valves, dual thermal valves, and convection motors we source per call through the Fisher and Paykel pipeline.

What is the typical cost for a DCS ignition or oven igniter call in Palo Alto?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $440. Oven glow-bar igniter runs $300 to $520. Gas work is licensed under CSLB #1136642. Written quote before we start.

DCS · PALO ALTO

Service · All DCS Models

DCS Cooking Appliance Repair · Palo Alto, CA

DCS by Fisher and Paykel RGS series all-gas range, integrated grill and griddle, and outdoor grill service for Palo Alto.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

DCS in Palo Alto

DCS in Palo Alto kitchens.

Palo Alto DCS calls run heavy in Old Palo Alto, where remodels spec the RGS series pro all-gas range. A lot of these estate kitchens pair the 48 or 60 inch range with the GL grill or GD griddle module, plus a built-in DCS grill out back.

We see top-burner ignition faults and glow-bar oven igniters most on these installs at year ten and after. ZIP 94301, also 94303 and 94306. Drive time from San Ramon is 35 minutes via 680 and 84.

Common repairs we do

What we close on the truck.

Top-burner ignition fault. Spark with no light or no spark at all. Trace to spark electrode, reignition module, transformer, or burner switch.
Burner will not simmer or burns yellow. Restricted jets, misaligned burner with locating pins not seated, or wrong orifices after LP conversion.
Grill or griddle burner weak or dead. Weak igniter or stuck thermal valve on the GL grill or GD griddle module. Igniter or valve swap.
Oven bake glow-bar igniter. Igniter glows but does not draw enough current to open the safety valve. Glow-bar swap, or dual thermal valve and convection motor check.

Models we service

DCS product lines.

RGS professional gas ranges (30, 36, 48, 60 inch)
Sealed dual-orifice burners
Integrated grill and griddle modules
Infrared broiler and gas convection oven
Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in Palo Alto questions, answered.

How quickly can you reach Palo Alto for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 84. Same-day work is realistic when we have a window. Old Palo Alto and the 94301, 94303, 94306 ZIPs routed together.
Do you carry common DCS parts for the typical units in Palo Alto?

We carry spark electrodes, reignition modules, transformers, burner switches, and glow-bar igniters on the truck. Thermal valves, dual thermal valves, and convection motors we source per call through the Fisher and Paykel pipeline.
What is the typical cost for a DCS ignition or oven igniter call in Palo Alto?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $440. Oven glow-bar igniter runs $300 to $520. Gas work is licensed under CSLB #1136642. Written quote before we start.

Need DCS service in Palo Alto?

Tell us what is broken. We will quote it.