How quickly can you reach Atherton for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 84. Same-day work is realistic when we have a window. West Atherton and Lindenwood routed together.

Do you carry common DCS parts for the typical units in Atherton?

We carry spark electrodes, reignition modules, transformers, burner switches, orifices, and glow-bar igniters on the truck. Thermal valves, convection motors, and oven thermostats we source per call through the Fisher and Paykel pipeline.

What is the typical cost for a DCS ignition or oven call in Atherton?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $240 to $480. Oven glow-bar igniter and safety valve runs $320 to $560. Gas work is CSLB #1136642. Written quote before we start.

DCS · ATHERTON

Service · All DCS Models

DCS Cooking Appliance Repair · Atherton, CA

DCS by Fisher and Paykel RGS pro all-gas range, grill and griddle module, and outdoor grill service for Atherton.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

DCS in Atherton

DCS in Atherton kitchens.

Atherton DCS calls land in the West Atherton and Lindenwood estate kitchens. A lot of these homes spec the RGS series indoor pro all-gas range, 36 or 48 inch, with a GL grill or GD griddle module, and often a matching DCS built-in grill in the outdoor kitchen.

We see top-burner ignition faults and burners that will not simmer in roughly equal frequency on these estate installs. ZIP 94027. Drive time from San Ramon is 35 minutes via 680 and 84.

Common repairs we do

What we close on the truck.

Top-burner ignition fault. Spark with no light or no spark. Traced to the spark electrode, reignition module, transformer, or burner switch.
Burner will not simmer or burns yellow. Restricted jets, a misaligned burner with locating pins not seated, or wrong orifices after an LP conversion.
Grill or griddle module igniter or thermal valve. Weak igniter or a stuck thermal valve on the GL or GD module. Igniter swap or valve replacement.
Oven bake glow-bar igniter. Igniter glows but does not draw enough current to open the safety valve. Glow-bar swap, or dual thermal valve and convection motor when indicated.

Models we service

DCS product lines.

RGS professional gas ranges (30, 36, 48, 60 inch)
Sealed dual-orifice burners
Integrated grill and griddle modules
Infrared broiler and gas convection oven
Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in Atherton questions, answered.

How quickly can you reach Atherton for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 84. Same-day work is realistic when we have a window. West Atherton and Lindenwood routed together.
Do you carry common DCS parts for the typical units in Atherton?

We carry spark electrodes, reignition modules, transformers, burner switches, orifices, and glow-bar igniters on the truck. Thermal valves, convection motors, and oven thermostats we source per call through the Fisher and Paykel pipeline.
What is the typical cost for a DCS ignition or oven call in Atherton?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $240 to $480. Oven glow-bar igniter and safety valve runs $320 to $560. Gas work is CSLB #1136642. Written quote before we start.

Need DCS service in Atherton?

Tell us what is broken. We will quote it.