How quickly can you reach Oakland for a DCS service call?

Drive time from San Ramon is 30 minutes via 24 through the Caldecott. Same-day work is realistic when we have a window. Rockridge and Montclair routed together.

Do you carry common DCS parts, or do you order them?

We carry spark electrodes, reignition modules, burner switches, glow-bar igniters, and grill igniters on the truck. Thermal valves, convection motors, and dual thermal valves we source per call. DCS is owned by Fisher and Paykel, so those parts run through the F&P pipeline.

What does a DCS range or grill call cost in Oakland?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $450. Oven glow-bar igniter runs $240 to $420. Gas work is CSLB licensed, natural gas set at 5 inches WC, propane at 10. Written quote before we start.

DCS · OAKLAND

Service · All DCS Models

DCS Cooking Appliance Repair · Oakland, CA

DCS by Fisher and Paykel RGS pro all-gas range, grill, and griddle service for Oakland.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

DCS in Oakland

DCS in Oakland kitchens.

Oakland DCS calls run to the Rockridge and Montclair hill homes, where the indoor RGS pro range usually pairs with a DCS built-in grill out on the deck. We see the 36 and 48-inch RGS units most, with the GL grill and GD griddle modules.

Top-burner ignition faults and bake glow-bar failures lead the list at year ten. ZIP 94618. Drive time from San Ramon is 30 minutes via 24 through the Caldecott.

Common repairs we do

What we close on the truck.

Top-burner ignition fault. Click without spark or no reignition. We trace it to the spark electrode, reignition module, transformer, or burner switch.
Burner will not simmer or burns yellow. Restricted jets, a burner sitting off its locating pins, or wrong orifices left in after a propane conversion.
Grill or griddle burner weak igniter. Outdoor GL or GD module no light or slow light. Weak igniter or a stuck thermal valve. Swap and test.
Oven bake glow-bar igniter. Igniter glows but will not pull enough current to open the safety valve. No bake. Glow-bar swap.

Models we service

DCS product lines.

RGS professional gas ranges (30, 36, 48, 60 inch)
Sealed dual-orifice burners
Integrated grill and griddle modules
Infrared broiler and gas convection oven
Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in Oakland questions, answered.

How quickly can you reach Oakland for a DCS service call?

Drive time from San Ramon is 30 minutes via 24 through the Caldecott. Same-day work is realistic when we have a window. Rockridge and Montclair routed together.
Do you carry common DCS parts, or do you order them?

We carry spark electrodes, reignition modules, burner switches, glow-bar igniters, and grill igniters on the truck. Thermal valves, convection motors, and dual thermal valves we source per call. DCS is owned by Fisher and Paykel, so those parts run through the F&P pipeline.
What does a DCS range or grill call cost in Oakland?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $450. Oven glow-bar igniter runs $240 to $420. Gas work is CSLB licensed, natural gas set at 5 inches WC, propane at 10. Written quote before we start.

Need DCS service in Oakland?

Tell us what is broken. We will quote it.