How quickly can you reach Berkeley for a DCS service call?

Drive time from San Ramon is 35 minutes via 24. Same-day work is realistic when we have a window. North Berkeley and Berkeley Hills calls routed together.

Do you carry common DCS parts, or do you order them?

We carry spark electrodes, reignition modules, burner switches, and glow-bar igniters on the truck. Thermal valves, convection motors, and module-specific parts we source per call through the Fisher and Paykel pipeline, since DCS is a Fisher and Paykel brand.

What is the typical cost for a DCS ignition or oven igniter call in Berkeley?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $480. Oven glow-bar igniter and safety valve runs $300 to $520. Written quote before we start. Gas work is licensed CSLB #1136642, natural gas set at 5 inches WC, propane at 10.

DCS · BERKELEY

Service · All DCS Models

DCS Cooking Appliance Repair · Berkeley, CA

DCS by Fisher and Paykel RGS pro all-gas range, grill and griddle module, and outdoor grill service for Berkeley.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

DCS in Berkeley

DCS in Berkeley kitchens.

Berkeley DCS calls run through the North Berkeley and Berkeley Hills remodels. A lot of those kitchens spec the RGS-series all-gas range, 36 or 48 inch, often with a GL grill or GD griddle module, and some run a matching DCS built-in grill out on the deck.

We see top-burner ignition faults and oven glow-bar igniters at about equal frequency on these installs. ZIP 94708. Drive time from San Ramon is 35 minutes via 24.

Common repairs we do

What we close on the truck.

Top-burner ignition fault. Click without spark or constant sparking. Trace to spark electrode, reignition module, transformer, or burner switch.
Burner will not simmer or burns yellow. Restricted jets, burner locating pins not seated, or wrong orifice after a propane conversion. Clean, reseat, or correct orifice.
Grill or griddle module no flame. Weak igniter or stuck thermal valve on the GL or GD module. Igniter or valve swap.
Oven bake glow-bar igniter. Igniter glows but will not draw enough current to open the safety valve. Glow-bar swap, valve check.

Models we service

DCS product lines.

RGS professional gas ranges (30, 36, 48, 60 inch)
Sealed dual-orifice burners
Integrated grill and griddle modules
Infrared broiler and gas convection oven
Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in Berkeley questions, answered.

How quickly can you reach Berkeley for a DCS service call?

Drive time from San Ramon is 35 minutes via 24. Same-day work is realistic when we have a window. North Berkeley and Berkeley Hills calls routed together.
Do you carry common DCS parts, or do you order them?

We carry spark electrodes, reignition modules, burner switches, and glow-bar igniters on the truck. Thermal valves, convection motors, and module-specific parts we source per call through the Fisher and Paykel pipeline, since DCS is a Fisher and Paykel brand.
What is the typical cost for a DCS ignition or oven igniter call in Berkeley?

Diagnostic is $75, waived when you book the repair. Top-burner ignition work runs $260 to $480. Oven glow-bar igniter and safety valve runs $300 to $520. Written quote before we start. Gas work is licensed CSLB #1136642, natural gas set at 5 inches WC, propane at 10.

Need DCS service in Berkeley?

Tell us what is broken. We will quote it.