How quickly can you reach Cupertino for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 280. Same-day work is realistic when we have a window. West-side and Monte Vista calls routed together.

Do you carry common DCS parts for the typical units in Cupertino?

We carry spark electrodes, reignition modules, burner switches, orifices, and glow-bar igniters on the truck. Thermal valves, dual thermal valves, and convection motors we source per call through the Fisher and Paykel pipeline.

What is the typical cost for a DCS ignition or oven igniter call in Cupertino?

Diagnostic is $75, waived when you book the repair. Top-burner ignition runs $260 to $440. Bake glow-bar igniter runs $240 to $420. Gas work is licensed under CSLB #1136642. Written quote before we start.

DCS · CUPERTINO

Service · All DCS Models

DCS Cooking Appliance Repair · Cupertino, CA

DCS by Fisher and Paykel RGS pro all-gas range, grill and griddle module, and outdoor grill service for Cupertino.

$75 diagnostic (waived with repair)
Same-day best effort
CSLB #1136642

Call (925) 999-4095

DCS in Cupertino

DCS in Cupertino kitchens.

Cupertino DCS calls run through the west-side custom kitchens off Regnart and up in Monte Vista, plus the estate lots near Lincoln. A lot of these are the RGS series indoor all-gas range, 48 or 60 inch, with a GL grill or GD griddle module and an infrared broiler. We also get the built-in outdoor grills off the back patios.

Top-burner ignition faults and bake glow-bar failures are the bulk of it on the indoor ranges at year eight and after. ZIP 95014. Drive time from San Ramon is 35 minutes via 680 and 280.

Common repairs we do

What we close on the truck.

Top-burner ignition fault. Click without spark. Traced to the spark electrode, reignition module, transformer, or burner switch.
Burner will not simmer or burns yellow. Restricted jets, misaligned burner with locating pins not seated, or wrong orifices after a propane conversion.
Grill or griddle burner no light. Weak igniter or a stuck thermal valve on the GL or GD module. Igniter and valve test, swap.
Oven bake glow-bar igniter. Igniter glows but draws too little current to open the safety valve. No bake heat. Glow-bar swap.

Models we service

DCS product lines.

RGS professional gas ranges (30, 36, 48, 60 inch)
Sealed dual-orifice burners
Integrated grill and griddle modules
Infrared broiler and gas convection oven
Built-in outdoor grills

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

DCS service in neighboring cities.

FAQ

DCS in Cupertino questions, answered.

How quickly can you reach Cupertino for a DCS service call?

Drive time from San Ramon is 35 minutes via 680 and 280. Same-day work is realistic when we have a window. West-side and Monte Vista calls routed together.
Do you carry common DCS parts for the typical units in Cupertino?

We carry spark electrodes, reignition modules, burner switches, orifices, and glow-bar igniters on the truck. Thermal valves, dual thermal valves, and convection motors we source per call through the Fisher and Paykel pipeline.
What is the typical cost for a DCS ignition or oven igniter call in Cupertino?

Diagnostic is $75, waived when you book the repair. Top-burner ignition runs $260 to $440. Bake glow-bar igniter runs $240 to $420. Gas work is licensed under CSLB #1136642. Written quote before we start.

Need DCS service in Cupertino?

Tell us what is broken. We will quote it.