Do you need the loading dock or a freight elevator to reach our machine?

Usually not for a repair, since parts and tools come in by hand. If the machine ever has to leave the building, we plan it with your building manager ahead of time. Send us any sign-in or parking rules when you book.

Can an Elmeco board be repaired, or only replaced?

We replace a failed board with the correct part for your model. Before we order one, we test the inputs and connectors, because a board often takes the blame for a sensor fault. The written quote names the part.

Does the machine in our office break room need the same care as a bar's?

The same parts wear, just more slowly. A machine that runs a few hours a day still needs clean seals, a clear condenser and a nightly wash. Lighter use can let gaskets dry out between runs, so check them when you refill.

ELMECO · EMERYVILLE

Service · All Elmeco Models

Elmeco Frozen Beverage Machine Repair · Emeryville, CA

Elmeco repair in Emeryville's Powell Street and Bay Street district, diagnosed in place at the counter.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Elmeco in Emeryville

Elmeco commercial service.

Emeryville packs its shopping and housing close together, with the Powell Street and Bay Street district at the center. Getting to a machine can mean a loading dock, a freight elevator or a building manager's sign-in sheet, so we ask about access when you book.

Moving a granita machine out of a building like that is a job in itself, so we diagnose and repair in place wherever possible. Board faults, mix sensors, couplings and gearmotors are all counter repairs. Emeryville is covered by our technician based in Benicia. The $99 diagnostic is credited toward the repair, and the quote is written before we start.

Common repairs we handle.

Control board faults and dead functions. A failing board can throw faults or kill one function, like the stir or the refrigeration, while the rest keeps running. We check the supply voltage, the connectors and the sensor inputs first. A loose plug or a bad sensor is often the real cause, and the board is the costly part.
Mix sensor out of calibration. When the sensor misreads consistency, the machine over-freezes and stalls, or it leaves product too thin to sell. We clean the sensor, test it against a known batch and replace it when it has drifted. Then we run the bowl through a full cycle to confirm the texture.
Worn gearmotor on a machine that never rests. An Elmeco serving long hours puts steady wear on its gearmotor. Slowing, grinding and stalls under a full bowl are the signs. We test it under load and replace the assembly when it is done, with the common motors carried on the truck.

Models we service

Elmeco product lines.

Big Biz, First Class, and Quick Gel granita machines
First Class Millennium (FC1/FC2/FC3)

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Elmeco service in neighboring cities.

More cities

Elmeco across our service area.

FAQ

Elmeco in Emeryville questions, answered.

Do you need the loading dock or a freight elevator to reach our machine?

Usually not for a repair, since parts and tools come in by hand. If the machine ever has to leave the building, we plan it with your building manager ahead of time. Send us any sign-in or parking rules when you book.
Can an Elmeco board be repaired, or only replaced?

We replace a failed board with the correct part for your model. Before we order one, we test the inputs and connectors, because a board often takes the blame for a sensor fault. The written quote names the part.
Does the machine in our office break room need the same care as a bar's?

The same parts wear, just more slowly. A machine that runs a few hours a day still needs clean seals, a clear condenser and a nightly wash. Lighter use can let gaskets dry out between runs, so check them when you refill.

Need Elmeco service in Emeryville?

Tell us what is broken. We will quote it.