One group on our Aurelia stopped working. Is the whole board bad?

Probably not. A single dead group points to that group's solenoid, its wiring or one output on the board. We test from the solenoid back toward the board, and the quote names the part that actually failed.

The display went blank after a power outage. What should we check first?

Make sure the outlet and breaker are live, then try a restart. If it stays blank, leave it off and book a pickup. A surge can damage the board's power supply, and the bench diagnosis tells us whether it did.

Are parts for Nuova Simonelli electronics hard to get?

No. Aurelia and Appia II parts are well supported, boards included. That keeps an electronics fault a repair worth making instead of a reason to replace the machine.

NUOVA SIMONELLI · SAN PABLO

Service · All Nuova Simonelli Models

Nuova Simonelli Commercial Coffee Machine Repair · San Pablo, CA

Nuova Simonelli control board, display and dead-group diagnosis for San Pablo espresso counters.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Nuova Simonelli in San Pablo

Nuova Simonelli commercial service.

San Pablo sits on the plain between the Berkeley Hills and San Pablo Bay, with San Pablo Avenue running past the civic center and Rumrill Boulevard mixing shops with homes. An espresso counter in either place depends on a control board to fire each group and read each probe. When a group goes dead or the display goes blank, the board gets blamed, but the cause may sit in a connector, a solenoid coil or the water side.

We trace both the water and the electrical side before condemning a part, because replacing a good board costs a lot and fixes nothing. The machine comes to our bench by pickup and returns after the repair you approve in writing. EBMUD water here is soft to moderate. ADRIUM is an independent shop, CSLB #1136642.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Group that will not fire. A dead group can be a failed solenoid coil, a loose connector or a board output. We measure each in turn and repair the one that failed, then run the group through a string of shots. A coil that tests open or shorted is replaced, along with its valve if the valve is worn.
Blank or frozen display. A blank display may be the display itself, its cable or the board's power supply. We test the supply and the connections first and replace the display or board only when the measurements point there.
Board errors caused by the water side. A scaled level probe or a flowmeter that stopped turning feeds the board bad data, and the board shuts the machine down. We clean or replace the sensor, clear the error and run the machine through its full cycle.

Models we service

Nuova Simonelli product lines.

Aurelia cafe machines
Appia II
Musica

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Nearby cities

Nuova Simonelli service in neighboring cities.

More cities

Nuova Simonelli across our service area.

FAQ

Nuova Simonelli in San Pablo questions, answered.

One group on our Aurelia stopped working. Is the whole board bad?

Probably not. A single dead group points to that group's solenoid, its wiring or one output on the board. We test from the solenoid back toward the board, and the quote names the part that actually failed.
The display went blank after a power outage. What should we check first?

Make sure the outlet and breaker are live, then try a restart. If it stays blank, leave it off and book a pickup. A surge can damage the board's power supply, and the bench diagnosis tells us whether it did.
Are parts for Nuova Simonelli electronics hard to get?

No. Aurelia and Appia II parts are well supported, boards included. That keeps an electronics fault a repair worth making instead of a reason to replace the machine.
What does the Nuova Simonelli pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Nuova Simonelli bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Nuova Simonelli coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Nuova Simonelli service in San Pablo?

Tell us what the machine is doing. We will confirm pickup.