Do you carry Nuova Simonelli parts on the truck?

We stock the high-turn items: group gaskets, screens, solenoid valves, and common flowmeter and probe parts for Aurelia and Appia. Model-specific boards or elements we order after diagnosis with a written quote, and we tell you the realistic lead time instead of a guess.

Can you set our machine to a specific brew temperature and pressure?

Yes. We measure at the group with proper instrumentation, adjust the pressurestat or temperature settings, and set pump pressure at the gauge and at the group. You get the machine back at your recipe numbers, not factory defaults.

NUOVA SIMONELLI · MILLBRAE

Service · All Nuova Simonelli Models

Nuova Simonelli Commercial Coffee Machine Repair · Millbrae, CA

Nuova Simonelli repair on the Broadway corridor: Aurelia, Appia, Musica

$150 pickup deposit. Pickup, bench diagnosis, and return are included. Repair work is quoted separately.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Nuova Simonelli in Millbrae

Nuova Simonelli commercial service.

Broadway in Millbrae is one of the densest food streets on the Peninsula, and the cafes and dessert shops mixed in with the restaurants run real espresso volume. Nuova Simonelli is built for exactly that pace. We service Aurelia and Appia machines in Millbrae shops where the machine cannot be down through a weekend, because the weekend is the business.

These machines are plumbed in and heavily used, so the failures we see are honest wear: gaskets, valves, dosing drift, and scale. The Aurelia has been the World Barista Championship machine for years, and it deserves a tech who sets it back to spec instead of just getting it limping. I bring a Scace device and actually measure brew temperature and pressure rather than guessing.

$150 pickup deposit. Pickup, bench diagnosis, and return are included. Repair work is quoted separately. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. Repair parts are covered for 6 months; consumables are covered for 90 days.

Common repairs we do

What we repair on the bench.

Group gaskets and diffuser screens worn flat. An Appia in a busy Millbrae cafe locks in hundreds of portafilters a day. When baristas start cranking the handle past center to get a seal, the group gasket is done and the diffuser is usually caked. We replace gaskets and screens, backflush, and check the group solenoid while the machine is open.
Volumetric dosing drift on Aurelia. When programmed shot volumes wander, the flowmeter is the usual suspect. Scale and fines foul the turbine and doses run long or short shot to shot. We clean or replace the flowmeter, reprogram the doses, and verify against a scale so every group pours what the recipe says.
Steam pressure loss and slow recovery. A plumbed machine on Peninsula water builds scale on the heating element and probes. The symptom is a steam wand that dies during back-to-back lattes at the morning rush. We descale the boiler, test the element and pressurestat, and confirm recovery time under load before we call it fixed.

Models we service

Nuova Simonelli product lines.

Aurelia cafe machines
Appia II
Musica

Pricing and warranty

What it costs. What we stand behind.

$150

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Nearby cities

Nuova Simonelli service in neighboring cities.

More cities

Nuova Simonelli across our service area.

FAQ

Nuova Simonelli in Millbrae questions, answered.

Do you carry Nuova Simonelli parts on the truck?

We stock the high-turn items: group gaskets, screens, solenoid valves, and common flowmeter and probe parts for Aurelia and Appia. Model-specific boards or elements we order after diagnosis with a written quote, and we tell you the realistic lead time instead of a guess.
Can you set our machine to a specific brew temperature and pressure?

Yes. We measure at the group with proper instrumentation, adjust the pressurestat or temperature settings, and set pump pressure at the gauge and at the group. You get the machine back at your recipe numbers, not factory defaults.
What does the Nuova Simonelli pickup deposit cover?

$150 pickup deposit. Pickup, bench diagnosis, and return are included. Repair work is quoted separately.
How long does Nuova Simonelli bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Nuova Simonelli coffee-machine repair?

Repair parts are covered for 6 months; consumables are covered for 90 days.

Need Nuova Simonelli service in Millbrae?

Tell us what the machine is doing. We will confirm pickup.