We are in Port Costa. Do you come out?

Yes. Port Costa and Crockett are covered along with Rodeo. The diagnosis at the dispenser, the $99 diagnostic credited toward the repair and the written quote are the same in each.

How can we keep the bay air from corroding our dispenser?

Wipe the cabinet dry at close, keep the condenser clean and do not hose down the area around the machine. Have the electrical contacts checked once a year. Early corrosion cleans off, and late corrosion means new parts.

Our bowl dispenser only fails on damp mornings. Why?

Moisture on corroded contacts or terminals can break the circuit until the unit warms up and dries out. We look for green or white deposits on the switches and wiring, clean or replace them, and test the dispenser from a cold start.

CRATHCO · RODEO

Service · All Crathco Models

Crathco Frozen Beverage Machine Repair · Rodeo, CA

Crathco dispenser repair in Rodeo, Crockett and Port Costa, from corroded contacts to worn drives.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Crathco in Rodeo

Crathco commercial service.

Rodeo sits on the eastern shore of San Pablo Bay, where damp, salty air reaches anything with exposed metal. On a Crathco, that means the condenser fins, the switch contacts and the wiring terminals. The symptoms look unrelated: a fan that stops, a light that flickers, a compressor that trips now and then. Corrosion is often the common thread, and we check for it on every Crathco we open here, whether it is a D line bowl, a FROZEN unit or a spray model.

Our technician for Rodeo, Crockett and Port Costa is based in Benicia. We diagnose at the dispenser and put the quote in writing before any work. Your $99 diagnostic is credited toward the repair. Refrigerant work is done under ADRIUM's EPA 608 Universal certification.

Common repairs we handle.

Switch and terminal corrosion causing random faults. Corroded contacts pass current unevenly, so parts drop out and come back. We clean or replace the corroded switches and terminals, tighten connections and test the unit through full cycles before calling it fixed.
Condenser fan seized by corrosion. A seized fan stops airflow over the condenser, and the compressor overheats within a cycle or two. We free or replace the fan, clean the coil and check the compressor for heat damage. A salt-pitted blade gets replaced with the motor, since an unbalanced blade wears the new bearings early.
Coupling wear on a bowl run full all day. The magnetic coupling wears with load and hours. A bowl that stops mixing near the end of a busy day is often slipping at the coupling. We check the magnet and coupling, replace what is worn, then run the bowl full through a long cycle to make sure the agitator keeps pace.

Models we service

Crathco product lines.

Crathco D, FROZEN, and Mini-Pro beverage dispensers
Bubbler and spray units

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Crathco jobs we have closed.

Millbrae, CA · Electrolux Professional Crathco cold beverage dispenser

Crathco Cold Beverage Dispenser: Compressor Diagnosis in Millbrae

The twin-tank Crathco dispenser stopped cooling and the product was going warm during service at a busy Millbrae restaurant.
Read case →

See all case studies →

Nearby cities

Crathco service in neighboring cities.

More cities

Crathco across our service area.

FAQ

Crathco in Rodeo questions, answered.

We are in Port Costa. Do you come out?

Yes. Port Costa and Crockett are covered along with Rodeo. The diagnosis at the dispenser, the $99 diagnostic credited toward the repair and the written quote are the same in each.
How can we keep the bay air from corroding our dispenser?

Wipe the cabinet dry at close, keep the condenser clean and do not hose down the area around the machine. Have the electrical contacts checked once a year. Early corrosion cleans off, and late corrosion means new parts.
Our bowl dispenser only fails on damp mornings. Why?

Moisture on corroded contacts or terminals can break the circuit until the unit warms up and dries out. We look for green or white deposits on the switches and wiring, clean or replace them, and test the dispenser from a cold start.

Need Crathco service in Rodeo?

Tell us what is broken. We will quote it.