How quickly can you reach Newark from San Ramon?

About 30 minutes, taking 680 South and coming across on 84 or Mission Boulevard. Fremont and Union City sit on the same route, so we are in this corridor constantly and Newark calls are easy to fit into the day's loop.

My prep table is out and I have product in it. What do I do right now?

Call us, then move what you can into any working box and keep the failed unit closed. On the phone I will ask what the compressor is doing, because that tells me which parts to load on the van. We work seven days, so a weekend failure does not have to wait for Monday.

Is an old Beverage-Air worth fixing?

Often yes. These cabinets are simple and parts are available. If the fix is a fan motor, gasket, or control, repair wins easily. If the compressor is gone on a corroded cabinet, I will tell you straight in the written quote and you decide with real numbers.

BEVERAGE-AIR · NEWARK

Service · All Beverage-Air Models

Beverage-Air Commercial Refrigeration Repair · Newark, CA

Beverage-Air repair in Newark, covering NewPark Mall food spots and Thornton Avenue kitchens.

$75 diagnostic (waived with repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Beverage-Air in Newark

Beverage-Air commercial service.

Newark's food scene is working class and busy. Taquerias and pho shops along Thornton Avenue, food court operations at NewPark Mall, and catering kitchens tucked into the industrial parks near Mowry all run Beverage-Air reach-ins and prep units because they are affordable workhorses. When one fails, there is rarely a spare box to move product into.

ADRIUM handles this equipment through Bay Area Refrigeration Service, our commercial refrigeration division. Andrew carries EPA Section 608 Universal certification for refrigerant work and CSLB #1136642. We run seven days a week, the $75 diagnostic is waived with repair, and repairs carry a one year warranty.

The units I open in Newark are usually older and hard used, which changes the diagnosis. A ten year old SPE27HC prep table with a warm rail might have a tired compressor, but more often it has a filthy condenser and a gasket that quit sealing years ago. I measure airflow and charge before condemning anything expensive.

Common repairs we do

What we close on the truck.

Condenser coil packed solid in high volume kitchens. Taqueria kitchens produce grease vapor that binds dust into a mat across the condenser. The fan motor labors against it until it seizes, and the compressor follows if nobody catches it. We pull the motor, clean the coil properly with coil cleaner rather than a quick brush, and set a cleaning interval so it stops recurring.
Evaporator ice block from a torn gasket. Prep cooks lean into reach-in doors with full pans and gaskets tear at the corners. Humid air pours in, the evaporator freezes over, and airflow through the cabinet dies. We replace the gasket, thaw and inspect the coil, and check that the drain pan and line handle the meltwater without flooding the cabinet.
Thermostat and control faults miscycling the compressor. On older Newark units we see both mechanical cold controls sticking and newer digital boards with failed relays. Either way the compressor cycles wrong and product temperature swings. We test the control chain end to end and replace only the failed component, with the price in writing first.

Models we service

Beverage-Air product lines.

Reach-ins
Back-bar coolers
Under-counters
Prep tables

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
Written

90 days on consumables, 1 year on major parts, 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Beverage-Air service in neighboring cities.

More cities

Beverage-Air across our service area.

FAQ

Beverage-Air in Newark questions, answered.

How quickly can you reach Newark from San Ramon?

About 30 minutes, taking 680 South and coming across on 84 or Mission Boulevard. Fremont and Union City sit on the same route, so we are in this corridor constantly and Newark calls are easy to fit into the day's loop.
My prep table is out and I have product in it. What do I do right now?

Call us, then move what you can into any working box and keep the failed unit closed. On the phone I will ask what the compressor is doing, because that tells me which parts to load on the van. We work seven days, so a weekend failure does not have to wait for Monday.
Is an old Beverage-Air worth fixing?

Often yes. These cabinets are simple and parts are available. If the fix is a fan motor, gasket, or control, repair wins easily. If the compressor is gone on a corroded cabinet, I will tell you straight in the written quote and you decide with real numbers.

Need Beverage-Air service in Newark?

Tell us what is broken. We will quote it.