We bought a used Ultra-2. Can you check it before we start selling from it?

Yes. We run it through a full freeze cycle, check the sealed system and the drive, and look at the seals and the control side. You get a written list of what is sound and what needs work, with the cost of each item, before you load it with product.

Our JDF runs, but the juice tastes flat. Is that the machine?

It can be. A unit that is not holding temperature, or a dispense problem, changes the taste before anyone notices a fault light. We check product temperature, the refrigeration and the dispense path, then tell you whether it is the machine or the product.

What should staff do while waiting for the repair?

Turn the machine off if it is grinding, leaking into the base or tripping its breaker. Running it that way can turn a seal job into a drive job. Empty the barrel, keep the hopper clean and leave the panels closed until our technician arrives.

BUNN · SAN PABLO

Service · All Bunn Models

Bunn Frozen Beverage Machine Repair · San Pablo, CA

Bunn JDF and Ultra-2 repair in San Pablo, with the refrigeration tested and the quote in writing.

Bunn equipment connected to the building plumbing is diagnosed on site for $99, credited toward the repair. Countertop units come to our bench; we confirm the bench price when you book.
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Bunn in San Pablo

Bunn commercial service.

San Pablo sits on the plain between the north end of the Berkeley Hills and San Pablo Bay. San Pablo Avenue runs through the city, and Rumrill Boulevard mixes shops with housing. We repair Bunn frozen and granita dispensers here, plus the JDF juice and drink units, at the counter where they run.

A JDF that stops chilling gets the same sealed-system workup as a slush barrel. We check airflow, then pressures and the compressor, and find the leak if there is one. ADRIUM holds EPA 608 Universal certification, so that work stays in-house. The technician we send to San Pablo is based in Benicia. For Bunn connected to the building plumbing, the on-site diagnostic is $99, credited toward repair. We confirm countertop bench pricing when you book.

Common repairs we handle.

JDF juice unit dispensing warm. A JDF that pours warm juice has lost cooling somewhere between the condenser and the product. We check the condenser and fan, then the charge and the compressor. If the sealed system has a leak, we find it and repair it before recharging.
Spinner gear motor noise on an Ultra-2. A rattle or grind from the spinner side, or a spinner that stops with the auger still turning, means the gear motor or its bearing is wearing out. We replace the worn drive parts and check the rest of the gear train while it is apart.
Leaks at the front plate after cleaning. If product starts leaking after a cleaning, a seal or gasket may be torn, dry or seated wrong. We inspect the seal kit and the front gaskets, replace what is damaged and show staff how the parts go back in, so the next cleaning ends without a leak.

Models we service

Bunn product lines.

Ultra-2 and Ultra-NX frozen and granita dispensers
JDF juice and drink units

Pricing and warranty

What it costs. What we stand behind.

Price at booking

Bunn equipment connected to the building plumbing is diagnosed on site for $99, credited toward the repair. Countertop units come to our bench; we confirm the bench price when you book.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Bunn jobs we have closed.

Union City, CA · Commercial Bean-to-Cup Coffee Machine

Bunn Crescendo Commercial Coffee Machine Repair

A busy Union City location was losing its coffee service. The Crescendo's brew path had worn out: stiff, stained silicone lines and spent valve diaphragms and seals.
Read case →

See all case studies →

Nearby cities

Bunn service in neighboring cities.

More cities

Bunn across our service area.

FAQ

Bunn in San Pablo questions, answered.

We bought a used Ultra-2. Can you check it before we start selling from it?

Yes. We run it through a full freeze cycle, check the sealed system and the drive, and look at the seals and the control side. You get a written list of what is sound and what needs work, with the cost of each item, before you load it with product.
Our JDF runs, but the juice tastes flat. Is that the machine?

It can be. A unit that is not holding temperature, or a dispense problem, changes the taste before anyone notices a fault light. We check product temperature, the refrigeration and the dispense path, then tell you whether it is the machine or the product.
What should staff do while waiting for the repair?

Turn the machine off if it is grinding, leaking into the base or tripping its breaker. Running it that way can turn a seal job into a drive job. Empty the barrel, keep the hopper clean and leave the panels closed until our technician arrives.

Need Bunn service in San Pablo?

Tell us what is broken. We will quote it.