Our machine shows a code on the display. Should we reset it and wait?

Write the code down first. A reset may clear it for a day, but a code like the Indigo NXT condenser reminder points at a real maintenance item. Give us the code and the model number when you call, and our technician brings the likely parts.

Is a ten-year-old cuber worth repairing?

Often, yes. A water pump, a hot-gas valve or a sensor is a modest repair next to a new head. A failed compressor or a leaking evaporator on an older machine is where replacement starts to make sense. We put both options in the written quote so you can compare.

How often should the filter on a busy machine be changed?

Every six months, even though the printed manual says twelve. A tired filter lets scale through to the plate and the water valve, and a clogged one starves the machine of water. We change it at each maintenance visit and date a sticker inside the panel.

COMMERCIAL ICE MACHINE REPAIR · NEWARK

Commercial Ice Machine Repair · Newark, CA

Ice machine repair for Newark restaurant kitchens, markets and break rooms: Hoshizaki, Manitowoc, Scotsman, Koolaire.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Commercial Ice Machine Repair in Newark

Commercial Ice Machine Repair for Newark kitchens.

Newark is one ZIP, 94560, and its commercial ice sits in the places any working city has: restaurant kitchens, small markets, bars, office break rooms and school cafeterias. The machines are the standard ones. Hoshizaki KM cubers, Manitowoc Indigo NXT heads on storage bins, NEO undercounter units behind a counter, and Scotsman cubers. Koolaire, the Manitowoc value line, shares many parts with the Indigo and gets the same diagnosis.

A Hoshizaki that runs all day with an empty bin is one of the clearer faults to chase. The hot-gas valve hangs open or sticks shut, production stops, and the compressor keeps running with nothing to show for it. Our technician isolates the valve, measures the coil resistance, and fits a genuine Hoshizaki part, since aftermarket coils on these machines do not last. The $99 diagnostic is credited toward the repair, and the quote is written before any part is ordered.

Common repairs we handle.

KM water pump noisy at startup. The pump motor on the KM series wears its bearings with age. First it gets loud on startup, then the machine keeps making ice while throwing an intermittent high-amp fault. We replace the whole pump assembly rather than the motor alone, because the impeller tends to crack once the bearing goes.
Thin cubes and freeze cycles that drag on. Scale on the evaporator plate slows heat transfer, so cubes come out thin or cloudy and each cycle runs long. We delime and sanitize the water system, swap the filter, and time a full cycle against the rated figure before we call the job done.
Indigo NXT shutting down on high pressure. The Indigo NXT posts a condenser-clean reminder well before it trips. Left alone, head pressure climbs until the machine shuts itself off. We clean the coil, replace the air filter, reset the reminder, and write the cleaning date inside the panel.
Undercounter unit leaving water on the floor. Undercounter cubers drain by gravity. A slimed drain line or tubing with no fall backs water into the cabinet and out onto the floor. We clear and sanitize the drain path, check the air gap at the floor drain, and look for a cracked trough or a loose fitting.

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Commercial Ice Machine Repair in neighboring cities.

More cities

Commercial Ice Machine Repair across our service area.

FAQ

Commercial Ice Machine Repair in Newark questions, answered.

Our machine shows a code on the display. Should we reset it and wait?

Write the code down first. A reset may clear it for a day, but a code like the Indigo NXT condenser reminder points at a real maintenance item. Give us the code and the model number when you call, and our technician brings the likely parts.
Is a ten-year-old cuber worth repairing?

Often, yes. A water pump, a hot-gas valve or a sensor is a modest repair next to a new head. A failed compressor or a leaking evaporator on an older machine is where replacement starts to make sense. We put both options in the written quote so you can compare.
How often should the filter on a busy machine be changed?

Every six months, even though the printed manual says twelve. A tired filter lets scale through to the plate and the water valve, and a clogged one starves the machine of water. We change it at each maintenance visit and date a sticker inside the panel.

Need commercial ice machine repair in Newark?

Tell us what is broken. We will quote it.