Do you collect from Crockett as well as Rodeo?

Yes, and from Port Costa too. Crockett shares EBMUD water with Rodeo, while Port Costa is on the Contra Costa Water District, so tell us which town the machine is in when you book.

Our steam wand spits water for the first few seconds. Is that a problem?

A short burst of condensed water when the wand first opens is normal, which is why baristas purge it. Wet steam that continues past the purge, or water building up in the milk, means the boiler level or the valve needs attention.

Is our older Black Eagle still worth repairing?

Usually. Black Eagle machines are built to be serviced for years, and the parts come through the distributor. If the boilers or frame are too far gone, the written quote says so before you spend anything on it.

VICTORIA ARDUINO · RODEO

Service · All Victoria Arduino Models

Victoria Arduino Commercial Coffee Machine Repair · Rodeo, CA

Victoria Arduino repair for Rodeo, Crockett and Port Costa, with pickup and steam-side bench diagnosis.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
Bench diagnosis: up to one week. Most repairs: 3–4 weeks.
Same-day pickup may be available. Same-day repair is not offered.
CSLB #1136642

Call (925) 999-4095

Victoria Arduino in Rodeo

Victoria Arduino commercial service.

Rodeo sits on the eastern shore of San Pablo Bay, served by Interstate 80 and State Route 4. Next door, Crockett looks out where the Carquinez Strait opens into the bay, and Port Costa sits on the strait's south shore. We collect Victoria Arduino machines from all three.

When a machine arrives with a wet wand, a boiler that takes too long to fill, or a water level error, the steam side is where we start. The level probe and the fill valve decide how full the steam boiler gets, and either one can fail without much warning. Rodeo and Crockett run on EBMUD water, soft to moderate; Port Costa's comes from the Contra Costa Water District, so we note which supply the machine lives on.

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair. Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered. 6 months on parts and labor; 90 days on consumables.

Common repairs we do

What we repair on the bench.

Water level error on the steam boiler. The level probe tells the board when the steam boiler is full. Scale or a failing connection makes it read dry, the fill valve keeps opening, and the machine either floods the boiler or stops with an error. We clean or replace the probe and test the fill cycle.
Fill valve sticking open or shut. A sticking fill valve starves the boiler or overfills it regardless of what the probe reports. We test the coil, clean or replace the valve, and watch several fill cycles on the bench.
Wet steam from the wand. Water spitting from the wand usually comes from an overfilled boiler or a worn steam valve. Once the level is right, we rebuild the valve and test until the steam runs dry.

Models we service

Victoria Arduino product lines.

Black Eagle (VA388)
Eagle One
Adonis

Pricing and warranty

What it costs. What we stand behind.

$150–450

Pickup deposit. Pickup, bench diagnosis, and return included. Repair quoted separately.
3–4 weeks

Most repairs. Bench diagnosis can take up to one week.
6 / 90

6 months on repair parts. 90 days on consumables.

Nearby cities

Victoria Arduino service in neighboring cities.

More cities

Victoria Arduino across our service area.

FAQ

Victoria Arduino in Rodeo questions, answered.

Do you collect from Crockett as well as Rodeo?

Yes, and from Port Costa too. Crockett shares EBMUD water with Rodeo, while Port Costa is on the Contra Costa Water District, so tell us which town the machine is in when you book.
Our steam wand spits water for the first few seconds. Is that a problem?

A short burst of condensed water when the wand first opens is normal, which is why baristas purge it. Wet steam that continues past the purge, or water building up in the milk, means the boiler level or the valve needs attention.
Is our older Black Eagle still worth repairing?

Usually. Black Eagle machines are built to be serviced for years, and the parts come through the distributor. If the boilers or frame are too far gone, the written quote says so before you spend anything on it.
What does the Victoria Arduino pickup deposit cover?

$150–450 deposit depending on the model. It covers pickup, bench diagnosis and return, and is not credited toward the repair.
How long does Victoria Arduino bench repair take?

Bench diagnosis can take up to one week; most repairs take 3–4 weeks. Same-day pickup may be available, but same-day repair is not offered.
What warranty applies to Victoria Arduino coffee-machine repair?

6 months on parts and labor; 90 days on consumables.

Need Victoria Arduino service in Rodeo?

Tell us what the machine is doing. We will confirm pickup.