Sticky streaks run down the back of our Vevor. What does that mean?

A seal is leaking. The streaks are mix that got past the rear seal or a tank gasket. It is a small repair now, and a gear motor later if the syrup reaches the drive.

Can we replace the seals ourselves?

On simple gaskets, yes. Get the exact part for your model, install it clean and lightly lubricated, and test with water before adding mix. If syrup has already reached the gear motor, have the drive checked as well.

Do you service Vevor machines in Crockett and Port Costa?

Yes. We take calls in Crockett and Port Costa as well as Rodeo, with the same $99 diagnostic credited toward the repair and a written quote before any work.

VEVOR · RODEO

Service · All Vevor Models

Vevor Frozen Beverage Machine Repair · Rodeo, CA

Vevor slush machine seal and gasket repair in Rodeo, with calls in Crockett and Port Costa too.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Vevor in Rodeo

Vevor commercial service.

Rodeo sits on the eastern shore of San Pablo Bay, with Crockett and Port Costa nearby, and we take calls in all three. On any Vevor slush machine the seals are the quiet failure: a tank gasket or rear seal that dries out lets mix weep toward the drive long before anyone sees a puddle.

A leaking seal does more damage than the drip suggests. Mix that reaches the back of the tank can ice up the bowl area, get into the gear motor and burn it over time. We replace the gaskets and seals, lubricate them with food-safe lubricant on reassembly and check the gear motor for syrup and wear.

The technician who covers Rodeo and its neighbors works out of Benicia. The $99 diagnostic is credited toward the repair; the quote is written before any work starts. ADRIUM holds EPA 608 Universal certification if the refrigeration also needs attention.

Common repairs we handle.

Mix weeping from the back of the tank. Sticky streaks behind the tank or down the back panel mean the rear seal is passing mix. We drain the tank, replace the seal, clean the drive side and check that nothing has reached the motor.
Gear motor stalled by syrup that got past a seal. Syrup that works past a seal into the drive dries hard and loads the gear motor until it stalls or burns. We clean the drive, replace the seal, and test or replace the motor depending on what we find.
Tank gasket leaking at the base. A gasket that has flattened or cracked lets mix seep out where the tank meets the machine. We fit a new gasket, seat the tank evenly and fill with water to check for leaks before mix goes back in.

Models we service

Vevor product lines.

2-tank and 3-tank slush and granita machines

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Vevor jobs we have closed.

See all case studies →

Nearby cities

Vevor service in neighboring cities.

More cities

Vevor across our service area.

FAQ

Vevor in Rodeo questions, answered.

Sticky streaks run down the back of our Vevor. What does that mean?

A seal is leaking. The streaks are mix that got past the rear seal or a tank gasket. It is a small repair now, and a gear motor later if the syrup reaches the drive.
Can we replace the seals ourselves?

On simple gaskets, yes. Get the exact part for your model, install it clean and lightly lubricated, and test with water before adding mix. If syrup has already reached the gear motor, have the drive checked as well.
Do you service Vevor machines in Crockett and Port Costa?

Yes. We take calls in Crockett and Port Costa as well as Rodeo, with the same $99 diagnostic credited toward the repair and a written quote before any work.

Need Vevor service in Rodeo?

Tell us what is broken. We will quote it.