Is it worth having a tech drive from San Ramon to Burlingame for a cheap machine like a Vevor?

Often yes, because we are already here. Burlingame and Hillsborough are one route day for us, about 50 minutes over the bridge, so your call slots into an existing loop rather than a special trip. A $200 to $300 repair on a machine earning money every day beats two weeks of downtime waiting on a replacement shipment.

The machine is only 18 months old and already failing. Did we buy junk?

You bought a light-duty machine doing heavy-duty work, which is the standard Vevor story. Eighteen months of daily Broadway foot traffic is real mileage on that gearbox. Fix the wear part, then help it out: keep the condenser clear, do not run the auger against a frozen block, and rinse the seals daily.

Can you look at two machines in one visit?

Yes, and you should have us do exactly that. One diagnostic visit covering both machines splits the trip cost, and shops running multiple Vevor units usually have the same wear developing on both. We quote each repair separately in writing so you can approve one, both, or neither.

VEVOR · BURLINGAME

Service · All Vevor Models

Vevor Frozen Beverage Machine Repair · Burlingame, CA

Vevor slush and granita machine repair in Burlingame, fixed for less than replacing it twice.

$75 diagnostic (waived with repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Vevor in Burlingame

Vevor commercial service.

Vevor slush machines are all over Burlingame's food scene, in the boba shops and dessert cafes along Broadway and in the corner markets serving the BART commuter crowd. They are cheap to buy, which is why they are everywhere, and they run hard, which is why we get called. The good news is the failure list is short and most of it is genuinely fixable.

With Vevor the decision is pure economics. A repair that costs a third of a new machine and gets you through the summer season is a win. A repair that costs as much as the machine is not, and I will tell you which one you are looking at after the diagnostic, in a written quote. The $75 fee folds into the repair if you go ahead.

We stock the generic components these machines share, relays, capacitors, seals, and thermostats, because waiting two weeks on an overseas part in July is not a plan.

Common repairs we do

What we close on the truck.

Auger gearbox wear and stripped couplings. The spiral stops turning or chatters while the compressor keeps running, and the mix freezes into a solid block around the auger. The gear motor and coupling are the wear point on every Vevor slush unit. I replace the failed drive component and check auger shaft seals while the bowl is off, since they fail next.
Bowl seal and spigot leaks. Sticky syrup mix ends up under the machine or weeping from the tap. Bowl gaskets and spigot seals harden from sugar and daily washing, and a slow leak also works its way toward the electronics below. I replace the seal kit, check the bowl for stress cracks at the mounting points, and reseat everything to spec.
Weak freezing from a fouled condenser or low charge. The mix stays slushy-thin on max setting during a warm afternoon. First suspect is a condenser blocked with dust in a tight back-counter spot. If the coil is clean and it still will not pull down, I check the charge. I am EPA 608 certified, so a findable leak gets an actual repair, not a quiet top-off.

Models we service

Vevor product lines.

2-tank and 3-tank slush and granita machines

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
Written

90 days on consumables, 1 year on major parts, 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Vevor jobs we have closed.

Union City, CA · Commercial Ice Cream Machine

Ice Cream Machine Refrigerant Leak Diagnosis for a Union City Restaurant

Soft-serve ice cream machine at Tribu Grill in Union City stopped holding temperature; product would not freeze.
Read case →

See all case studies →

Nearby cities

Vevor service in neighboring cities.

FAQ

Vevor in Burlingame questions, answered.

Is it worth having a tech drive from San Ramon to Burlingame for a cheap machine like a Vevor?

Often yes, because we are already here. Burlingame and Hillsborough are one route day for us, about 50 minutes over the bridge, so your call slots into an existing loop rather than a special trip. A $200 to $300 repair on a machine earning money every day beats two weeks of downtime waiting on a replacement shipment.
The machine is only 18 months old and already failing. Did we buy junk?

You bought a light-duty machine doing heavy-duty work, which is the standard Vevor story. Eighteen months of daily Broadway foot traffic is real mileage on that gearbox. Fix the wear part, then help it out: keep the condenser clear, do not run the auger against a frozen block, and rinse the seals daily.
Can you look at two machines in one visit?

Yes, and you should have us do exactly that. One diagnostic visit covering both machines splits the trip cost, and shops running multiple Vevor units usually have the same wear developing on both. We quote each repair separately in writing so you can approve one, both, or neither.

Need Vevor service in Burlingame?

Tell us what is broken. We will quote it.

Call (925) 999-4095