Skip to main content
ADRIUM Service Solutions
(925) 999-4095 · San Ramon, CA · CSLB #1136642 · BBB A+

VEVOR · UNION CITY

Service · All Vevor Models

Vevor Frozen Beverage Machine Repair · Union City, CA

Vevor slush and granita machine repair in Union City, the closest South Bay stop to our shop

  • $75 diagnostic (waived with repair)
  • Same or next-day best effort
  • CSLB #1136642
Call (925) 999-4095

Vevor in Union City

Vevor commercial service.

Union City is one of our shortest runs, so Vevor owners here get some of our fastest response. The machines we see are working units, no showpieces. Corner stores and gas station marts near Union Landing, halal markets and taquerias along Alvarado-Niles and Decoto, and a few catering operations that haul their double-bowl units to weekend events. These machines pour all day in the summer and sit near hot compressor-heavy coolers, which shapes what breaks.

The event-catering angle is a Union City specialty. A 12L Vevor bounced around in a van takes hits a counter machine never sees. Cracked bowl lugs, bent fan blades, connectors shaken loose off the control board. I ask every catering customer to run the machine for a full freeze cycle the day before an event, because finding the problem then costs $75 and finding it mid-quinceañera costs the party.

ADRIUM Service Solutions comes out from San Ramon 7 days a week. Diagnostic is $75, waived when you go ahead with the repair, and every repair is covered for 1 year. Owner Andrew Kuznetsov carries EPA Section 608 Universal certification for sealed system work and CSLB #1136642.

Common repairs we do

What we close on the truck.

  • Compressor overload trips in hot store back rooms. Union City corner stores often park the slush machine next to reach-in coolers that dump heat into the same corner. The Vevor compressor overload opens, resets, opens again, and each cycle shortens compressor life. We verify the overload and relay, then fix the real problem, which is usually a matted condenser and zero clearance. Moving the machine eight inches has saved more than one compressor.
  • Auger scraping the evaporator cylinder. Worn front bushings let the auger drop and drag on the cylinder wall. You hear a rhythmic scrape and find gray plastic flecks in the slush, which means product is getting contaminated. We replace the bushings and the scraper blades, check the auger shaft for wear, and confirm the bowl seats straight. Caught early it is a small job. Ignored, it grooves the cylinder and the quote gets ugly.
  • Loose wiring and board connectors from transport. For the catering units that ride to events, vibration works the spade connectors and board plugs loose. The machine powers on but a bowl will not spin, or the compressor never gets the call. We reseat and secure every connector, add strain relief where the factory skipped it, and load-test the machine through a full freeze before it goes back in the van.

Models we service

Vevor product lines.

  • 2-tank and 3-tank slush and granita machines

Pricing and warranty

What it costs. What we stand behind.

  • $75

    Diagnostic visit. Waived when you book the repair with us.

  • Written

    90 days on consumables, 1 year on major parts, 2 years on sealed-system rebuilds. Quoted in writing before work starts.

  • CSLB

    #1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Vevor service in neighboring cities.

FAQ

Vevor in Union City questions, answered.

  • How quickly can you reach Union City from San Ramon?
    It is roughly 25 to 30 minutes for us, down 680 and through Niles Canyon or via 880. Union City sits right between our Fremont, Hayward, and Newark stops, so we pass through the area almost daily and same-day service is realistic for most calls.
  • Our slush machine died and the weekend rush starts Friday. What are my options?
    Call as early as you can and say the machine is down, not just acting up. Because Union City is close, we can usually diagnose within a day. If the fix needs a stocked part like a gearbox, relay, or fan motor, it is often done in the same visit. If it needs an ordered part, the written quote states the lead time so you can plan around it.
  • Do you handle the refrigerant side, or just the mechanical parts?
    Both. Mechanical work covers gearboxes, seals, augers, and electrical. For sealed system work, leaks, recharges, and compressor swaps on R134a and R290 units, Andrew is EPA Section 608 Universal certified, which the law requires for that work. One visit, one written quote, no second contractor.

Need Vevor service in Union City?

Tell us what is broken. We will quote it.

Call (925) 999-4095
Call Now

Schedule a visit

Tell us what you need

  1. 1
  2. 2
  3. 3
  4. 4
What kind of appliance?
Which brand?
What's wrong, or what do you need?
Where can we reach you?

Request received.

Andrew will call you back during business hours to confirm the visit.