Do you have anyone close to San Bruno, or does every call come from San Ramon?

The technician who handles this part of the Peninsula lives in San Mateo, not San Ramon. I can't promise same-day arrival, but next-day is typical given how close that is.

Is it worth repairing an older Cuppone deck instead of replacing it?

Almost always, in my experience. A sensor, thermostat, element, or contactor repair costs a fraction of a new deck plus the downtime of pulling a 230V hardwired oven and rewiring a replacement.

What do you charge to come diagnose it?

$99, credited toward the repair. You get a written quote before anything gets replaced.

CUPPONE · SAN BRUNO

Service · All Cuppone Models

Cuppone Commercial Pizza Oven Repair · San Bruno, CA

Cuppone deck oven repair in San Bruno, San Bruno Avenue to the Tanforan shopping corridor.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Cuppone in San Bruno

Cuppone commercial service.

San Bruno Avenue has run small Italian and pizza kitchens for decades, and the shopping center that replaced the old Tanforan racetrack added a second cluster of restaurants near the BART station. Both lean on Cuppone electric decks for volume the gas ovens they replaced couldn't keep up with.

Proximity to SFO means some of these kitchens run long hours to catch late flight crowds, which puts extra cycles on a deck oven that a typical dinner-only restaurant never sees.

Our technician for this part of the Peninsula is based in San Mateo, a few minutes down the road, so a San Bruno call gets a fast look without waiting on a drive from our San Ramon shop.

Common repairs we do

What we close on the truck.

Recovery time creeping up. A door spring that's lost its tension and a gasket that's gone flat both show up the same way: the deck takes longer to get back to temperature after every open door. I replace both together since one usually follows the other by a few months.
One deck dead on a double stack. A dead deck with the other running fine points to a contactor or an element, and I check amp draw at each element behind the panel to tell which one it is before quoting the fix.
Thermostat and sensor faults. A setpoint that drifts or won't hold traces back to a capillary thermostat or a bad temperature sensor most of the time. I meter it first, then replace and recalibrate rather than guessing.

Models we service

Cuppone product lines.

Electric deck pizza ovens (Tiziano, Donatello, Giotto, Michelangelo)
Tunnel and conveyor pizza ovens
Rotating deck ovens
Dough mixers, spiral mixers, and proofers

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Cuppone jobs we have closed.

Livermore, CA · Commercial Pizza Oven

Cuppone Commercial Pizza Oven Repair Service

The diagnostics revealed a faulty temperature sensor causing inaccurate heat regulation.
Read case →

See all case studies →

Nearby cities

Cuppone service in neighboring cities.

More cities

Cuppone across our service area.

FAQ

Cuppone in San Bruno questions, answered.

Do you have anyone close to San Bruno, or does every call come from San Ramon?

The technician who handles this part of the Peninsula lives in San Mateo, not San Ramon. I can't promise same-day arrival, but next-day is typical given how close that is.
Is it worth repairing an older Cuppone deck instead of replacing it?

Almost always, in my experience. A sensor, thermostat, element, or contactor repair costs a fraction of a new deck plus the downtime of pulling a 230V hardwired oven and rewiring a replacement.
What do you charge to come diagnose it?

$99, credited toward the repair. You get a written quote before anything gets replaced.

Need Cuppone service in San Bruno?

Tell us what is broken. We will quote it.