Will you reset the belt speed after the repair so our bake times match?

Yes. After any drive or control repair we run test passes with your staff and set the speed to the bake your menu needs. We write the final setting on the invoice so it can be put back if someone moves the dial.

We lease our space in Pinole. Does the landlord need to be involved in an oven repair?

Not for work on the oven itself. If the fault turns out to be in the building supply or the breaker panel, we give you the voltage readings in writing so the landlord's electrician can pick it up from there.

Is a conveyor oven with a worn belt and motor worth fixing?

Usually. Belt and motor wear is ordinary maintenance on a conveyor oven, and both parts cost far less than a new oven. Replacement starts to make sense when the tunnel insulation, the frame and the controls are all failing together. We put both options in writing.

CUPPONE · PINOLE

Service · All Cuppone Models

Cuppone Commercial Pizza Oven Repair · Pinole, CA

Cuppone conveyor and tunnel oven repair in Pinole, from Old Town to the shops along Fitzgerald Drive.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Cuppone in Pinole

Cuppone commercial service.

A conveyor oven is only as good as its belt speed. Set it once and every pizza comes out the far end baked the same, as long as the belt keeps its pace and the tunnel holds its heat. If your Cuppone tunnel oven sits in a counter along Fitzgerald Drive, in the Pinole Vista Shopping Center or in Old Town, you notice the moment either one drifts.

We begin with the drive: belt tension, the drive motor and the speed control that sets the bake time. Then we test each heating element and the sensors that report tunnel temperature. Our technician for the Pinole area is based in Benicia. The diagnostic is $99 and is credited toward the repair. A written quote comes before any work. CSLB #1136642.

Common repairs we handle.

Conveyor belt slowing or stopping mid-bake. When the belt drags, pizzas sit too long in the tunnel and come out dark. A worn drive motor, a slipping drive chain or a belt catching on a bent link are the likely causes. We check each one, time the belt against its setting and adjust or replace what is worn.
Bake time wandering with nobody touching the dial. When the bake time drifts on its own, the speed control or the dial that feeds it is the likely part. We test the control's output to the motor at several settings, replace it if it wanders and time a full pass so the result matches your menu.
Tunnel hot at the entry and cool at the exit. One section running cold points to an element in that section that has opened, or a contactor that no longer closes. We read the draw on each element and test the contactor, so the part we replace is the one that actually failed.

Models we service

Cuppone product lines.

Electric deck pizza ovens (Tiziano, Donatello, Giotto, Michelangelo)
Tunnel and conveyor pizza ovens
Rotating deck ovens
Dough mixers, spiral mixers, and proofers

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Cuppone jobs we have closed.

Livermore, CA · Commercial Pizza Oven

Cuppone Commercial Pizza Oven Repair Service

The diagnostics revealed a faulty temperature sensor causing inaccurate heat regulation.
Read case →

See all case studies →

Nearby cities

Cuppone service in neighboring cities.

More cities

Cuppone across our service area.

FAQ

Cuppone in Pinole questions, answered.

Will you reset the belt speed after the repair so our bake times match?

Yes. After any drive or control repair we run test passes with your staff and set the speed to the bake your menu needs. We write the final setting on the invoice so it can be put back if someone moves the dial.
We lease our space in Pinole. Does the landlord need to be involved in an oven repair?

Not for work on the oven itself. If the fault turns out to be in the building supply or the breaker panel, we give you the voltage readings in writing so the landlord's electrician can pick it up from there.
Is a conveyor oven with a worn belt and motor worth fixing?

Usually. Belt and motor wear is ordinary maintenance on a conveyor oven, and both parts cost far less than a new oven. Replacement starts to make sense when the tunnel insulation, the frame and the controls are all failing together. We put both options in writing.

Need Cuppone service in Pinole?

Tell us what is broken. We will quote it.