SPACEMAN · HERCULES
Service · All Spaceman ModelsSpaceman Frozen Beverage Machine Repair · Hercules, CA
Spaceman slush and soft-serve repair in Hercules, from the Waterfront District to Refugio Valley Road
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
Spaceman in Hercules
Spaceman commercial service.
Hercules runs from the new Waterfront District by the bay to the 1970s and 1980s subdivisions inland along Refugio Valley Road. Wherever a Spaceman works in town, the fault that stops it cold can be electronic rather than mechanical. A mix-low sensor that misreads locks the barrel out. A control board that loses touch with the freeze cycle shows an error and quits.
Boards cost real money and sensors usually do not, so we test the sensor, its wiring and the connector before we condemn a board. Hercules is covered from Benicia, where our technician is based. The $99 diagnostic is credited toward the repair, you get a written quote first, and refrigerant work is covered by ADRIUM's EPA 608 Universal certification. CSLB #1136642.
Common repairs we handle.
- Mix-low alarm with a full hopper. A false mix-low alarm shuts the barrel down while there is plenty of product. The sensor may be coated with dried mix, its wire may be chafed, or the connector may be corroded by cleaning water. We clean and test the sensor, trace the wiring, and replace the part that reads wrong.
- Control board that faults mid-cycle. A board that throws an error and drops the freeze cycle can be failing, or it can be reacting to a bad input. We read the fault, check each sensor and the supply voltage, and swap the board only when it misbehaves with good inputs. That order keeps a sensor problem from turning into a board bill.
- Corroded connectors behind the front panel. Mix and sanitizer that get behind the panel attack terminals and connectors. Intermittent faults follow: a display that flickers, a motor that drops out, a sensor that comes and goes. We open the panel, clean or replace damaged connectors, and find the leak that let the liquid in.
Models we service
Spaceman product lines.
- Frozen-beverage and soft-serve machines
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Written
Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Nearby cities
Spaceman service in neighboring cities.
More cities
Spaceman across our service area.
- Spaceman in Berkeley
- Spaceman in Blackhawk
- Spaceman in Concord
- Spaceman in Danville
- Spaceman in Dublin
- Spaceman in Hayward
- Spaceman in Livermore
- Spaceman in Milpitas
- Spaceman in Oakland
- Spaceman in Palo Alto
- Spaceman in Pleasanton
- Spaceman in San Leandro
- Spaceman in San Ramon
- Spaceman in Santa Clara
- Spaceman in Walnut Creek
- Spaceman in Alameda
- Spaceman in Alamo
- Spaceman in Atherton
- Spaceman in Castro Valley
- Spaceman in Cupertino
- Spaceman in Fremont
- Spaceman in Hillsborough
- Spaceman in Lafayette
- Spaceman in Los Altos Hills
- Spaceman in Los Altos
- Spaceman in Los Gatos
- Spaceman in Martinez
- Spaceman in Menlo Park
- Spaceman in Moraga
- Spaceman in Mountain View
- Spaceman in Newark
- Spaceman in Orinda
- Spaceman in Piedmont
- Spaceman in Pleasant Hill
- Spaceman in San Jose
- Spaceman in Saratoga
- Spaceman in Sunnyvale
- Spaceman in Union City
- Spaceman in Millbrae
- Spaceman in Burlingame
- Spaceman in Albany
- Spaceman in El Cerrito
- Spaceman in Woodside
- Spaceman in Portola Valley
- Spaceman in Belmont
- Spaceman in San Carlos
- Spaceman in Redwood City
- Spaceman in East Palo Alto
- Spaceman in Half Moon Bay
- Spaceman in Daly City
- Spaceman in South San Francisco
- Spaceman in San Bruno
- Spaceman in Pacifica
- Spaceman in San Mateo
- Spaceman in Foster City
- Spaceman in Vallejo
- Spaceman in Benicia
- Spaceman in San Pablo
- Spaceman in Emeryville
- Spaceman in Clayton
- Spaceman in El Sobrante
FAQ
Spaceman in Hercules questions, answered.
-
The display shows an error but the machine seems fine. Can we reset it?
Once, yes, if the manual allows it. If the same code comes back, write it down and call us. A code that keeps returning points to a sensor, a connection or a real refrigeration fault, and resetting it again and again only hides the cause. -
Our Spaceman keeps locking out. Does that mean a new control board?
Less often than people expect. Boards do fail, but a misreading sensor or a bad connection produces the same lockout. We test the inputs first, so a board gets replaced only when the tests point to it. -
How should we clean around the sensors so they keep reading right?
Follow the Spaceman cleaning steps for your model, rinse the sanitizer off fully, and let the parts dry before reassembly. Keep water away from the panel and the connectors. Dried mix is the usual reason a sensor misreads, and a soft brush keeps it clean.
Need Spaceman service in Hercules?