Miele dishwasher drain repair in Fremont
Problem: The owner of a Miele dishwasher in Fremont booked a visit online. The dishwasher, a fully integrated G 7156 SCVi SF built in 2021, wasn’t draining.
Diagnostics: Water left in the bottom of a Miele has a short list of places to come from. There’s the filter in the bottom of the tub, the drain pump under it, and the drain line that carries the water out to the sink drain or disposal. A blockage in any one of them stops the drain.
On this one it wasn’t a single spot. The drain line was clogged, and the drain pump was blocked as well.
Solution: We cleaned out the drain line and cleared the blockage at the drain pump. No parts were replaced.
Result: If your Miele leaves water behind, start with the filter in the bottom of the tub. Pull it out, rinse it under the tap and put it back. If water still stands after the next cycle, the blockage is further down, in the pump or the line, and that’s a job for a technician. We repair Miele dishwashers in Fremont and across the East Bay.