How fast can you reach a Concord restaurant from San Ramon?

Concord is a 25 minute run up 680 from our San Ramon base, and we hold a regular Diablo Valley window for Concord, Pleasant Hill, and Walnut Creek. For a bar or kitchen with a down box, we run an after-hours line so a warm walk-in does not wait for the next routed day.

Can you service the Hoshizaki and Manitowoc ice machines downtown?

Yes. The Todos Santos corridor is steady ice work for us. We descale, replace bin thermostats and water valves, clear water-curtain and harvest faults, and run a full batch before we leave to confirm production.

Do you handle the sealed system, or just the easy stuff?

We do sealed-system work in-house with full recovery, evacuation, and weigh-in, and we are licensed for R290 hydrocarbon refrigerant that many current units use. We tell you straight whether a box is worth the sealed-system repair or whether replacement makes more sense before we start.

COMMERCIAL REFRIGERATION REPAIR · CONCORD

Commercial Refrigeration Repair · Concord, CA

Back-bar, reach-ins, walk-ins, and restaurant ice for the Todos Santos corridor in Concord.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Commercial Refrigeration Repair in Concord

Commercial Refrigeration Repair for Concord kitchens.

Concord's commercial refrigeration work lives downtown around Todos Santos Plaza, where the restaurant corridor runs Hoshizaki and Manitowoc ice alongside back-bar coolers and reach-ins. The residential ZIPs, 94518 through 94521, are mostly mid-century tract kitchens, but the back-of-house calls cluster in the bars and kitchens off Salvio and Willow Pass. That is where a slammed Friday rush ices an evaporator or stalls an ice machine mid-batch.

Most calls here follow a pattern we know cold. A back-bar fridge ices after service because a bartender propped the door open all night and the gasket stretched. An ice machine downtown stops dropping cubes because the bin thermostat drifted or the water curtain hung up. A reach-in runs warm because the condenser packed with grease and lint. We check airflow, gasket seal, and condensate path first, then go into the sealed system with full recovery and weigh-in if the numbers point there.

Common repairs we handle.

Hoshizaki or Manitowoc ice machine not dropping. Bin thermostat drift, water curtain hung up, or scaled evaporator. We descale, verify the harvest cycle, and confirm production over a full batch.
Back-bar fridge icing after the rush. Door gasket stretched from propping open during service. Evap ices the moment the rush ends. Gasket swap is usually under 30 minutes.
Reach-in running warm. Condenser packed with grease and lint, or a failed condenser-fan motor. We clean the coil, swap the motor if it is seized, and verify the hold over a service cycle.
Water pooling under a prep table. Condensate drain clogged with grease and food debris. We pull the line, blow it clear, and add an inline screen where the layout allows.

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
1 yr

Parts and labor warranty on completed repairs. In writing before we start.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Commercial Refrigeration Repair in neighboring cities.

More cities

Commercial Refrigeration Repair across our service area.

FAQ

Commercial Refrigeration Repair in Concord questions, answered.

How fast can you reach a Concord restaurant from San Ramon?

Concord is a 25 minute run up 680 from our San Ramon base, and we hold a regular Diablo Valley window for Concord, Pleasant Hill, and Walnut Creek. For a bar or kitchen with a down box, we run an after-hours line so a warm walk-in does not wait for the next routed day.
Can you service the Hoshizaki and Manitowoc ice machines downtown?

Yes. The Todos Santos corridor is steady ice work for us. We descale, replace bin thermostats and water valves, clear water-curtain and harvest faults, and run a full batch before we leave to confirm production.
Do you handle the sealed system, or just the easy stuff?

We do sealed-system work in-house with full recovery, evacuation, and weigh-in, and we are licensed for R290 hydrocarbon refrigerant that many current units use. We tell you straight whether a box is worth the sealed-system repair or whether replacement makes more sense before we start.

Need commercial refrigeration repair in Concord?

Tell us what is broken. We will quote it.