Independent service · Danville
JennAir repair in Danville
We repair JennAir cooking appliances and dishwashers in Danville as an independent company, not a factory-authorized JennAir servicer. The Danville job we have published is the one nobody wants: gas leaking at a built-in rangetop.
A rangetop shut off by PG&E
A built-in JennAir rangetop, 48 inches wide with six burners and a griddle (model JGCP548WP01), had gas escaping at the burners. PG&E came out first, confirmed gas at the cooktop and shut off its appliance valve. That made the house safe and left the kitchen without a cooktop.
Every burner here has a separate valve, all fed from one gas manifold. Our technician went through them behind the control panel and traced the leak to the valve for the right rear burner. We ordered the matching valve for this model, fitted it on the repair visit, and went over the new valve and its fittings with a gas detector before the panel went back on.
If the gas company has turned off your cooktop because of a leak, keep that valve shut until the repair is done, and do not switch it on to test whether the smell comes back.
Three JennAir jobs in Danville
Three JennAir jobs in Danville closed in August 2025, July 2026 and October 2026. One was a cooking appliance and two were dishwashers.
These are the Danville jobs with JennAir on the record. The rangetop case above is not matched to them, and three jobs cannot tell anyone how often a JennAir fails.
Before a JennAir visit
For a gas cooktop or rangetop, tell us if there is any smell of gas and whether PG&E has been out. For a dishwasher, say whether it will not drain, will not clean or shows an error. Dishwasher repairs can get expensive, so we diagnose and quote before you decide.
Diagnosing is $99 for the visit, and anything else you would like looked at while we're there is part of it. Approve the repair and we credit the $99 toward it.