Skip to main content
ADRIUM Service Solutions
(925) 999-4095 · San Ramon, CA · CSLB #1136642 · BBB A+
Call

HOSHIZAKI · DALY CITY

Service · All Hoshizaki Models

Hoshizaki Ice & Refrigeration Service · Daly City, CA

Hoshizaki ice and refrigeration service for Daly City's Mission Street and Westlake kitchens, where marine fog fouls condensers early.

  • $99 diagnostic (waived with repair)
  • Same or next-day best effort
  • CSLB #1136642
Call (925) 999-4095

Hoshizaki in Daly City

Hoshizaki commercial service.

Daly City Hoshizaki work runs along Mission Street and the Westlake shopping district, plus the banquet halls that serve the city's large Filipino community. Those halls run KM cubers hard on event weekends, filling coolers for two hundred guests at a time, while the smaller diners along Mission lean on undercounter units that just need to keep up with a lunch rush. I see both extremes in the same afternoon here.

The climate does something inland cities do not deal with. Daly City sits right in the fog belt, so the marine layer rolls over Serramonte most afternoons and leaves a film of damp grit on every condenser coil in reach of outside air. That buildup chokes airflow faster than dust alone would, and a machine that should run another year on its coils starts tripping high head pressure instead.

ADRIUM Service Solutions is a family shop out of San Ramon, CSLB #1136642, EPA Section 608 certified for the refrigerant side. Diagnostic is $99 and it's waived when you book the repair, with a written quote before any work starts. We're on the Peninsula seven days a week, and Brisbane next door falls on the same route as Daly City.

Common repairs we do

What we close on the truck.

  • Evaporator plate scale on banquet-hall KM cubers. A hall running full ice production every weekend coats the plate faster than a slow diner ever would. Cubes come out thin and cloudy before the machine finally can't keep pace. I descale the plate, flush the water distribution tube, and run a full freeze-harvest cycle to confirm the output actually recovered.
  • Condenser coil fouling from marine layer buildup. Fog residue and street grit cake onto the fins on any Daly City unit near an alley door or a back parking lot. Airflow drops, head pressure climbs, and the compressor short-cycles or trips out on high pressure during a dinner rush. I pull the fins, clean and comb them straight, and check the fan motor while I'm in there.
  • Reservoir float switch fouling on high-cycle machines. Slime and scale build up around the float switch on machines that barely get a rest between banquet events. The symptom is an overfill or a mid-cycle shutdown with a water system fault on the display. I clean or replace the float, sanitize the reservoir, and check the inlet screen for the sediment that usually caused it.

Models we service

Hoshizaki product lines.

  • KM cuber ice machines
  • Refrigerated prep tables
  • Sushi display cases
  • Ice and water dispensers
  • Undercounter ice

Pricing and warranty

What it costs. What we stand behind.

  • $99

    Diagnostic visit. Waived when you book the repair with us.

  • Written

    3 months standard, 1 year on inverter boards, up to 2 years on sealed-system rebuilds. Quoted in writing before work starts.

  • CSLB

    #1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Hoshizaki service in neighboring cities.

FAQ

Hoshizaki in Daly City questions, answered.

  • Do you cover Daly City fast, or are we waiting on a truck from San Ramon, and what about Brisbane?
    We have a technician based in San Mateo County now, so a Daly City call is not the East Bay drive it used to be. Brisbane sits right next to Daly City and runs on the same Peninsula route. I won't quote you a promised arrival window over the phone, but the tech lives close, not an hour and a half away.
  • What parts do you carry for Hoshizaki machines in Daly City?
    Common KM cuber hot gas valves, float switches, condenser fan motors, and the descale chemistry ride on the truck. Calibrated thermistors for prep tables and reach-ins too. If a part is unusual or the unit is older than most, I'll tell you honestly whether it needs to be ordered.
  • What does a Hoshizaki service call cost in Daly City?
    Diagnostic is $99 and it's waived once you approve the repair. I write the quote after I've actually opened the machine up, not off a phone description, so you're not guessing at the number.

Need Hoshizaki service in Daly City?

Tell us what is broken. We will quote it.

Call (925) 999-4095
Call Now

Schedule a visit

Tell us what you need

  1. 1
  2. 2
  3. 3
  4. 4
What kind of appliance?
Which brand?
What's wrong, or what do you need?
Where can we reach you?

Request received.

Andrew will call you back during business hours to confirm the visit.