How far is Concord from your San Ramon base?

About 25 minutes north on I-680, past Walnut Creek and Pleasant Hill. Concord anchors our Diablo Valley loop along with Pleasant Hill and Martinez, so we are in the area several times a week and can usually offer a next-day slot, often same-day.

My DishDrawer has a custom cabinet panel. Can you service it without damaging the front?

Yes. The drawer front and integration panel come off as an assembly, and I protect the panel while the unit is on the bench. Panel-ready units are the norm for this brand and I work on them weekly.

Is a five-year-old DishDrawer worth fixing?

Usually yes. The lid actuator is a wear part, not a sign the machine is done, and the tub, racks, and motor typically have plenty of life left. The written quote lets you compare the repair against replacement before you commit, and the $75 diagnostic is waived either way if we do the work.

FISHER & PAYKEL · CONCORD

Service · All Fisher & Paykel Models

Fisher & Paykel Built-in Appliance Repair · Concord, CA

Fisher & Paykel DishDrawer specialists covering Concord and the Diablo Valley, straight up I-680.

$75 diagnostic (waived with repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Fisher & Paykel in Concord

Fisher & Paykel in Concord kitchens.

Concord has two kinds of Fisher & Paykel customers. The first is the remodeled ranch home, and Concord has thousands of them, where a double DishDrawer went in during a kitchen update and is now old enough to fail. The second is the food scene around Todos Santos Plaza, where a compact DishDrawer sometimes runs behind a cafe counter as a glassware machine and gets restaurant-grade abuse it was never rated for.

Both types land on our schedule regularly because Concord is a clean shot up I-680 from San Ramon. I bring the common DD24 wear parts on the van, so a fair share of Concord DishDrawer calls close in one visit. For integrated refrigeration I am EPA Section 608 Universal certified, which matters when a sealed system diagnosis is on the table.

ADRIUM Service Solutions, owner Andrew Kuznetsov, CSLB #1136642. Diagnostic is $75, waived with repair, written quotes always, and we run 7 days a week.

Water and ice systems

The water inlet valve, a common fridge leak.

Every fridge with a dispenser or ice maker has a water inlet valve. The fittings can leak under the cabinet, or the solenoid fails and the dispenser and ice maker stop getting water.

Common repairs we do

What we close on the truck.

F1 fault from a worn lid actuator. The double DishDrawer lid actuator gives out near the five-year mark. Symptoms in that order: the drawer feels loose, then it will not lock, then F1 flashes and no cycle starts. Replacing the actuator restores the lid clamp force and clears the fault.
Lid seal leak tripping the flood switch. A DishDrawer that throws F1 with actual water in the base pan usually has a tired lid seal, not an actuator. Steam and detergent harden the seal over the years and it starts weeping into the pan during the wash phase. I dry the pan, replace the seal, and run a full cycle to verify before I leave.
Integrated fridge defrost failure. Fisher & Paykel integrated columns in Concord homes sometimes frost up the evaporator and the fridge section drifts warm while the freezer still works. The defrost element or its thermistor is the usual suspect. I meter both rather than guessing, because the access labor is the expensive part of this job.

Models we service

Fisher & Paykel product lines.

DishDrawer single and double
Column refrigerators
Integrated panel-ready refrigeration
French door refrigerators
Gas and induction cooktops

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
Written

90 days on consumables, 1 year on major parts, 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Nearby cities

Fisher & Paykel service in neighboring cities.

More cities

Fisher & Paykel across our service area.

FAQ

Fisher & Paykel in Concord questions, answered.

How far is Concord from your San Ramon base?

About 25 minutes north on I-680, past Walnut Creek and Pleasant Hill. Concord anchors our Diablo Valley loop along with Pleasant Hill and Martinez, so we are in the area several times a week and can usually offer a next-day slot, often same-day.
My DishDrawer has a custom cabinet panel. Can you service it without damaging the front?

Yes. The drawer front and integration panel come off as an assembly, and I protect the panel while the unit is on the bench. Panel-ready units are the norm for this brand and I work on them weekly.
Is a five-year-old DishDrawer worth fixing?

Usually yes. The lid actuator is a wear part, not a sign the machine is done, and the tub, racks, and motor typically have plenty of life left. The written quote lets you compare the repair against replacement before you commit, and the $75 diagnostic is waived either way if we do the work.

Need Fisher & Paykel service in Concord?

Tell us what is broken. We will quote it.