Our 1950s house has a newer Thermador range. Can old wiring cause ignition trouble?

It can. Spark ignition needs a properly grounded outlet with correct polarity, and older circuits do not always have one. We check the outlet with a tester during the diagnostic. If the house wiring is at fault, we tell you plainly so an electrician can fix it first.

Should we keep using a burner that clicks but does not light?

No, turn it off. Letting gas flow while the burner fails to light is not safe. Use the other burners if they light normally, and book a diagnostic. If you smell gas, leave the house and call your gas utility from outside.

What should we have ready when we book a Thermador repair?

The model and serial number from the rating label, which burner or cycle misbehaves, and any code on the display. If the label is hard to find, a photo of the appliance and a description of the symptom is enough to start.

THERMADOR · PINOLE

Service · All Thermador Models

Thermador Built-in Appliance Repair · Pinole, CA

Thermador Star Burner, oven and dishwasher repair for Pinole's remodeled postwar kitchens.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Thermador in Pinole

Thermador in Pinole kitchens.

Much of Pinole went up in the postwar boom of the 1940s through the 1960s, and a Thermador cooktop or range there arrived with a later remodel. That puts a modern Star Burner system in a house wired and plumbed decades earlier. When a burner sparks but will not light, or the ignitors click on every burner at once, we look at the parts first and the house second.

The parts come first because they fail in known places: the spark module, the ignitor electrode, the gas valve micro-switch, and carbon on the electrode tip that masks as a dead module. The house matters when the outlet is not grounded properly or the gas supply is shared with other appliances. The technician who covers Pinole is based in Benicia. A $99 diagnostic, credited toward the repair, and a written quote come before any work.

What the work looks like

A built-in sealed-system leak repair.

Nitrogen pressure and a soap-bubble test on a built-in fridge line set. We map every leak source before we braze.

The corroded copper up close. After fifteen-plus years this is why a real fix rebuilds the sealed run, so you do not pay the labor twice.

ADRIUM technician brazing a copper refrigerant line onto a compressor with a torch during a sealed-system repair — Brazing a new line onto the compressor during the same kind of sealed-system repair. Recover, braze, evacuate, and recharge: the real fix, done as one complete job.

What the work looks like

A gas oven burner lighting clean after service.

A gas oven bake burner lighting with an even blue flame after service. The white bar is the glow-bar igniter, and when it weakens the oven will not heat even though it still glows.

Common repairs we handle.

One burner sparks but the flame will not catch. We clean the burner ports and the electrode tip, re-gap the electrode and watch the spark. If it is weak or wanders, we test the spark module and its wiring. Most of the time the fix is a cleaning or a single part, not a new cooktop.
Ignitors clicking across all burners after a boil-over. A single wet or shorted micro-switch on one gas valve makes every ignitor fire. A boil-over is the usual trigger. We find the faulty switch, dry or replace it, and confirm each burner lights and stops clicking on its own.
Sapphire dishwasher showing E15. The E15 code means water has reached the base pan and tripped the float switch, often from a weeping recirc pump seal. We pull the unit, replace the pump and the base-pan check valve, dry the pan, and reset the code before a test cycle.

Models we service

Thermador product lines.

Pro Grand and Pro Harmony ranges
Star Burner cooktops
Sapphire dishwashers
Freedom collection refrigeration
Wall ovens

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Thermador jobs we have closed.

See all case studies →

Nearby cities

Thermador service in neighboring cities.

More cities

Thermador across our service area.

FAQ

Thermador in Pinole questions, answered.

Our 1950s house has a newer Thermador range. Can old wiring cause ignition trouble?

It can. Spark ignition needs a properly grounded outlet with correct polarity, and older circuits do not always have one. We check the outlet with a tester during the diagnostic. If the house wiring is at fault, we tell you plainly so an electrician can fix it first.
Should we keep using a burner that clicks but does not light?

No, turn it off. Letting gas flow while the burner fails to light is not safe. Use the other burners if they light normally, and book a diagnostic. If you smell gas, leave the house and call your gas utility from outside.
What should we have ready when we book a Thermador repair?

The model and serial number from the rating label, which burner or cycle misbehaves, and any code on the display. If the label is hard to find, a photo of the appliance and a description of the symptom is enough to start.

Need Thermador service in Pinole?

Tell us what is broken. We will quote it.