Do you come to Burlingame for a countertop machine, or do I bring it to you in San Ramon?

Either works. We run a Mid-Peninsula route through Burlingame and Hillsborough regularly, so pickup at your door is usually within a day or two, and the drive back to our bench in San Ramon is about 50 minutes. Bench repair with pickup and return is often the cheaper option for Breville-size machines.

Breville support said my out-of-warranty machine is not worth fixing. Is that true?

Usually not. A Barista Pro with a scaled thermojet or a bad solenoid is a modest repair on a machine that costs real money to replace. I give you the written number after diagnosis, and if the machine genuinely is not worth it, the $75 diagnostic is all you spend to know for sure.

How do I stop scale from killing the next machine?

Use the Breville filter and actually change it, or feed the machine filtered water, and run the descale cycle on the interval that matches Burlingame water rather than the manual's optimistic schedule. I set the interval for you at the repair and show you the routine on your specific model.

BREVILLE · BURLINGAME

Service · All Breville Models

Breville Espresso Machine Repair · Burlingame, CA

Breville espresso machine repair in Burlingame, Barista Pro, Bambino, Oracle, and Dual Boiler brought back to spec.

$75 diagnostic (waived with repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Breville in Burlingame

Breville in Burlingame kitchens.

Breville is the prosumer espresso brand of Burlingame kitchens and break rooms. The commuters who catch Caltrain and BART downtown made their peace with home espresso years ago, and the machines I pick up here are mostly the Barista series, the BES878 Barista Pro, the Barista Express, the Barista Touch, plus Bambinos in condo kitchens and the occasional Oracle or BES920 Dual Boiler in the bigger homes up the hill.

Peninsula tap water is moderately hard, and Breville's compact thermocoil and thermojet systems have narrow water paths that scale faster than a commercial boiler. Most of what lands on my bench is scale doing damage downstream, to solenoids, to the pump, to the over-pressure valve. Caught early it is a service. Caught late it is a parts list.

The $75 diagnostic applies and is waived when you approve the repair, and the work carries a 1-year warranty. For Burlingame offices with a Breville in the break room, we can do pickup and return so nobody has to babysit a repair visit.

Common repairs we do

What we close on the truck.

Scale blockage in the thermocoil and thermojet path. The Barista Pro and Bambino heat water through narrow passages that Burlingame water slowly closes. Symptoms are dropping brew temperature, weak flow at the group, and steam that takes forever. I disassemble and descale the heating path properly, replace the affected o-rings, and set up a filtration habit so the machine does not return in a year.
Steam wand solenoid and no-steam faults. On the Barista series a scaled or stuck steam solenoid gives you a wand that hisses weakly or nothing at all, and on the Oracle the auto-milk system adds a temperature probe that drifts. I rebuild or replace the solenoid, clear the steam path, and calibrate milk temp on the Oracle so the auto texture works like it did new.
Pump and over-pressure valve wear, low or erratic pressure. The vibratory pump in the Barista Express and the OPV behind it wear together. The gauge climbs slowly, shots channel, and pre-infusion feels wrong. On the BES920 Dual Boiler I also check the notorious o-ring under the boiler that causes internal leaks. I replace the pump and OPV as a matched set when the numbers say so.

Models we service

Breville product lines.

Barista Pro (BES878), Barista Express, Barista Touch
Bambino and Bambino Plus
Oracle and Oracle Touch
Dual Boiler (BES920)

Pricing and warranty

What it costs. What we stand behind.

$75

Diagnostic visit. Waived when you book the repair with us.
Written

90 days on consumables, 1 year on major parts, 2 years on sealed-system rebuilds. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Breville jobs we have closed.

Concord, CA · Breville Barista Pro espresso machine

Breville Barista Pro Only Ran 5 Seconds in Concord: A Loose Thermostat, No Parts

A Breville Barista Pro brought in from Concord would power on but only run for about five seconds before shutting off, so it could never pull a shot.
Read case →

See all case studies →

Nearby cities

Breville service in neighboring cities.

FAQ

Breville in Burlingame questions, answered.

Do you come to Burlingame for a countertop machine, or do I bring it to you in San Ramon?

Either works. We run a Mid-Peninsula route through Burlingame and Hillsborough regularly, so pickup at your door is usually within a day or two, and the drive back to our bench in San Ramon is about 50 minutes. Bench repair with pickup and return is often the cheaper option for Breville-size machines.
Breville support said my out-of-warranty machine is not worth fixing. Is that true?

Usually not. A Barista Pro with a scaled thermojet or a bad solenoid is a modest repair on a machine that costs real money to replace. I give you the written number after diagnosis, and if the machine genuinely is not worth it, the $75 diagnostic is all you spend to know for sure.
How do I stop scale from killing the next machine?

Use the Breville filter and actually change it, or feed the machine filtered water, and run the descale cycle on the interval that matches Burlingame water rather than the manual's optimistic schedule. I set the interval for you at the repair and show you the routine on your specific model.

Need Breville service in Burlingame?

Tell us what is broken. We will quote it.

Call (925) 999-4095