Our Devonshire remodel has a Bertazzoni cooktop and wall oven from different years. Do you need both model numbers?

Yes, please. Each unit has its own rating label, and parts are ordered by those numbers, not by the brand. If you can photograph both labels before the visit, our technician can check part availability ahead of time.

Why does our Bertazzoni wall oven bake well on regular bake but burn cookies on convection?

Convection moves hot air faster, so recipes often need a lower temperature or a shorter time. If the results are far off even then, the convection element may be running when it should cycle off, or the sensor may be reading low. We test both at temperature.

The newer downtown condo we bought has a Bertazzoni induction cooktop. Which pans work on it?

Pans with a magnetic base: cast iron, enameled cast iron and most stainless steel marked for induction. A magnet that sticks firmly to the bottom is the quick test. Aluminum, copper and glass will not heat, and the cooktop may flash an error or ignore the pan.

BERTAZZONI · SAN CARLOS

Service · All Bertazzoni Models

Bertazzoni Cooking Appliance Repair · San Carlos, CA

Bertazzoni cooktop and convection wall oven repair in San Carlos, from White Oaks and Devonshire to downtown.

$99 diagnostic (credited toward the repair)
Same or next-day best effort
CSLB #1136642

Call (925) 999-4095

Bertazzoni in San Carlos

Bertazzoni in San Carlos kitchens.

The original San Carlos tract kitchens in White Oaks and Devonshire were built in the 1950s around a freestanding range. Remodels west of El Camino and the newer construction near downtown tend to split the job instead, with a Bertazzoni gas or induction cooktop in the counter and an electric wall oven built into a cabinet nearby. Each piece has its own faults, and we diagnose them separately.

A Bertazzoni convection wall oven heats its convection air with an element behind the rear cover, around the fan. When convection bake stops working but regular bake still heats, that element has often burned open, or the fan motor has stopped turning. Our technician checks the element for continuity, powers the fan, and tests the relay that drives them before replacing anything. The $99 diagnostic is credited toward whatever repair you approve, and the approval is in writing.

Common repairs we do

Common repairs we handle.

Convection setting that blows air but will not heat. The ring element behind the rear cover can fail while the fan keeps turning. We remove the cover, test the element and its terminals, and replace it with the correct part for your model. Then we run convection bake and check the temperature with a probe.
Cooktop burner with a lazy yellow flame. Gas cooktop burners mix air through short venturi tubes, and when a burner base is knocked out of line during cleaning, the mix goes rich. We realign the venturi on the orifice, clean the burner head and ports, and set the flame to a clean blue.
Grease trapped between the oven door panes. Cooking vapor can work its way between the layers of glass in the oven door. Many doors can be taken apart for cleaning. We remove the door, separate the panes, clean them, and reassemble it with the seals and clips in place.

Models we service

Bertazzoni product lines.

Professional Series and Master Series ranges
Dual-fuel and all-gas ranges
Wall ovens
Induction and gas cooktops
Range hoods and ventilation

Pricing and warranty

What it costs. What we stand behind.

$99

Diagnostic visit. Credited toward the repair.
Written

Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
CSLB

#1136642. Bonded and insured. We file warranty paperwork when applicable.

Recent work

Bertazzoni jobs we have closed.

See all case studies →

Nearby cities

Bertazzoni service in neighboring cities.

More cities

Bertazzoni across our service area.

FAQ

Bertazzoni in San Carlos questions, answered.

Our Devonshire remodel has a Bertazzoni cooktop and wall oven from different years. Do you need both model numbers?

Yes, please. Each unit has its own rating label, and parts are ordered by those numbers, not by the brand. If you can photograph both labels before the visit, our technician can check part availability ahead of time.
Why does our Bertazzoni wall oven bake well on regular bake but burn cookies on convection?

Convection moves hot air faster, so recipes often need a lower temperature or a shorter time. If the results are far off even then, the convection element may be running when it should cycle off, or the sensor may be reading low. We test both at temperature.
The newer downtown condo we bought has a Bertazzoni induction cooktop. Which pans work on it?

Pans with a magnetic base: cast iron, enameled cast iron and most stainless steel marked for induction. A magnet that sticks firmly to the bottom is the quick test. Aluminum, copper and glass will not heat, and the cooktop may flash an error or ignore the pan.

Need Bertazzoni service in San Carlos?

Tell us what is broken. We will quote it.