TRAULSEN · BENICIA
Service · All Traulsen ModelsTraulsen Commercial Refrigeration Repair · Benicia, CA
Traulsen repair in Benicia for reach-ins, roll-ins, under-counters and blast chillers
- $99 diagnostic (credited toward the repair)
- Same or next-day best effort
- CSLB #1136642
Traulsen in Benicia
Traulsen commercial service.
Our technician is based right here in Benicia. The Arsenal Historic District holds studios, offices, and commercial and light-industrial space, and downtown centers on First Street and the waterfront. Food production in spaces like these can lean on a Traulsen blast chiller as hard as on a reach-in, and a chiller that slows down is a food-safety problem before it is a repair problem.
Cooked food has to come down through the danger zone on a schedule, and a chiller that takes longer with each batch is giving you a warning. We check the evaporator fans, the coil, the condenser, the charge and the product probe before anything else. The $99 diagnostic is credited toward the repair, you get a written quote before any work, and ADRIUM holds EPA 608 Universal certification. CSLB #1136642.
Benicia details
Traulsen service in Benicia: the local facts.
We service ZIP code 94510 in Benicia.
Across the Bay Area we completed more than 1,200 repair and service jobs in the last 12 months.
Traulsen product lines are on our Traulsen page, and every city we serve is on our service areas page.
Published jobs near Benicia
Common repairs we handle.
- Blast chiller pulling down too slowly. When batches take longer and longer to chill, something is costing the chiller capacity. A frosted coil, a slow evaporator fan, a dirty condenser or a low charge all show up this way. We run a timed pull-down with a probe in the product, then correct each loss we find.
- Food probe reading wrong. Blast chillers can end a cycle on product temperature, read from a probe pushed into the food. A damaged probe or a pinched cable ends the cycle early or runs it far too long. We test the probe against a reference thermometer and replace it when the reading is off.
- Condenser clogged on a hard-working chiller. A blast chiller moves a lot of heat in a short time, and its condenser has to get rid of it. A dirty coil cuts that capacity and pushes head pressure up. We clean the coil and fan, measure pressures under load, and show your staff where to check it.
Pricing and warranty
What it costs. What we stand behind.
-
$99
Diagnostic visit. Credited toward the repair.
-
Written
Parts and labor, 3 months to 2 years depending on the type of repair. Quoted in writing before work starts.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Nearby cities
Traulsen service in neighboring cities.
FAQ
Traulsen in Benicia questions, answered.
-
Can your repair notes go with our cooling logs for an inspection?
Yes. Our written findings list the fault, the part replaced and the temperatures we measured before and after. Keep them with your cooling logs. They show an inspector that the equipment problem was found and fixed. -
Can a Traulsen reach-in stand in for the blast chiller while it is down?
Not safely for hot food in quantity. A reach-in is built to hold cold product, not to pull heat out of it, and loading it with hot pans warms everything else inside. Use shallow pans, ice baths and smaller batches until the chiller is back. -
Do you service Traulsen units in Arsenal studios and small offices?
Yes. A Traulsen in a studio or office kitchen is diagnosed exactly like one on a restaurant line. When you book, mention the building entrance, where to park and who will meet our technician.
Need Traulsen service in Benicia?