ATOSA · DUBLIN
Service · All Atosa ModelsAtosa Commercial Refrigeration Service · Dublin, CA
Atosa MBF reach-in, MGF prep table, and MWF worktop service for Dublin restaurants.
- $75 diagnostic (waived with repair)
- Same-day best effort
- CSLB #1136642
Atosa in Dublin
Atosa commercial service.
Dublin Atosa installs are along the Dublin Boulevard corridor and inside the Hacienda Crossings food court footprint, plus a number of the chain-casual operators near the Hopyard interchange. The gear here is mostly 2017 and newer, so the call pattern leans toward MGF prep-table thermistor drift and door-gasket reseats, not the sealed-system work we see on older machines.
Door gaskets fail first on the prep tables because the lid cycles 200 plus times a service. We carry the gasket kits and the hinge sets in the truck. ZIP 94568. Drive time from San Ramon is 15 minutes via 680. We slot Dublin calls on the same Tri-Valley days we route Pleasanton and Livermore.
Common repairs we do
What we close on the truck.
- MBF reach-in evap-fan motor. Warm complaint, fan noise. Motor swap, gasket reseat.
- MGF prep table thermistor and control. Top drifts warm. Thermistor swap, board calibration.
- MWF worktop condenser-fan motor. High-temp alarm, fan stall. Motor swap, coil clean.
- Undercounter door gasket and hinge. Seal leak, door sag. Gasket and hinge swap.
Models we service
Atosa product lines.
- MBF reach-in refrigerators and freezers
- MGF prep tables
- MWF worktops
- Sandwich and salad units
- Undercounter refrigeration
Pricing and warranty
What it costs. What we stand behind.
-
$75
Diagnostic visit. Waived when you book the repair with us.
-
1 yr
Parts and labor warranty on completed repairs. In writing before we start.
-
CSLB
#1136642. Bonded and insured. We file warranty paperwork when applicable.
Nearby cities
Atosa service in neighboring cities.
More cities
Atosa across our service area.
FAQ
Atosa in Dublin questions, answered.
-
How quickly can you reach Dublin for an Atosa service call?
Drive time from San Ramon is 15 minutes via 680. Same-day work is realistic when we have a slot. Same-day work is realistic when we have a slot in the route. -
Do you carry common Atosa parts for the typical units in Dublin?
We carry MBF and MGF evap-fan motors, prep-table thermistors, common condenser-fan motors, door gaskets, and hinge kits on the truck. Boards by model. -
What is the typical cost for an Atosa evap-fan motor or thermistor call in Dublin?
Diagnostic is $75, waived when you book the repair. Evap-fan motor swap runs $280 to $440. Thermistor and board calibration runs $260 to $420. Written quote before work.
Need Atosa service in Dublin?